User manual

Combo KVM Extender, User’s Manual
- 9 -
3 Operations
3.1 Active Console Selection by Push Button
You can press push button on local unit DS-51110 (Local) to change the active
console of operation. There three type of active console configurations:
1. Local Console Only
You can operate the system only from local unit DS-51110 (Local).
2. Remote Console Only
You can operate the system only from remote unit DS-51110 (Remote)
3. Both Console
You can operate the system both from local unit DS-51110 (Local) and remote
unit DS-51110 (Remote).
The default configuration is “Both Console” mode. Once you change the active
console configuration, it will be saved and will not be affected by unit reset.
The active console can be shown via “Selected Indicators” of LED indicator, please
refer the description of next sections
3.2 LED Indicators
The LED indicators of remote console are the same as local if both units are
connected successfully; or all LED indicators at remote console will turn OFF.
 Selected Indicators (RED)
 Both Selected:
Indicates you can control your system from both the local and remote console.