KVM Switch, 2 Port, 4K30Hz, USB-C/USB/HDMI in, HDMI out, Network Quick Installation Guide DS-12901
User Considerations The manufacturer has the right to modify and change the information, documents and specification tables contained in the manual without prior notice. The manufacturer will not warrant, express, imply or legally declare its contents or specifically deny its marketability and applicability for special purposes. The same applies to any sold and licensed manufacturer's software described in this manual.
Regarding this Manual This user manual would assist you to effectively use product functions, including device installation, setting and operation procedures. For a better understanding of the contents of this manual see the following: Chapter 1 Introduction Introduces the rack KVM device system, including its functions, features and advantages, and describe and introduce its front and rear panel components. Chapter 2 Hardware Installation Explains how to install this product.
Table of Contents Chapter 1 Introduction .............................................................................. 5 Product Introduction..................................................................................... 5 Main Features ............................................................................................... 5 Package Contents .......................................................................................... 6 Technical Data .............................................
Chapter 1 Introduction Product Introduction The DIGITUS® 2-port KVM switch with USB-C™ and network connectivity gives you the ability to control two 4K-capable PCs from a single USB keyboard and mouse. Conveniently switch between the two PCs at the touch of a button, eliminating the need to reconnect all cables. The Gigabit network port provides convenient access to the network via the additional USB-C™ port. The output to a monitor is done via the integrated HDMI output.
Package Contents The DS-12901 switch package includes the following contents: 1 x KVM-Switch, 2-Port, HDM, USB-C™ 1 x QIG 1 x KVM Cables 1.2m 1 x USB-C™ Cable 0.5m Check and make sure that all parts are present and not damaged in transit. If you encounter problems, please contact your distributor. In order to prevent damage to the machine or the device connected to the machine, please read this manual carefully and follow the instructions for installation and operation.
Operating System Operating systems supported by remote users' computers include Windows XP and above The operating systems supported by the server connected to the switcher are shown in the following table: Operating System Windows Linux RedHat SuSE Debian Ubuntu UNIX AIX FreeBSD Sun Solaris Mac Novell Netware Version Windows 2000/XP/2003/2008/Vista/7/10/11 9.0 or higher 10/11. 1 or higher 3.1/4.0 7.04/7.10 4.3 or higher 5.5 or high 8 or high OS 9.0 to 10.6 (Snow Leopard) 6.
Components Front view 1 2 3 Switch button Status indicator Audio connection 4 USB 2.0 Type A 5 USB Type-C™ LEDs for status indication Pink: Output interface for the local MIC Green: Local audio output interface Peripherals that are local USB2.0 expansion ports and can connect to the corresponding USB 2.
Rear View 1 2 3 4 USB Type-C™ USB 2.0 Type B HDMI USB Type-C™ 5 6 RJ45 USB 2.
To install a 2-port desktop KVM device, follow these steps: 1. Insert the USB keyboard and USB mouse into the USB control port on the back panel of the device. 2. Connection HDMI display cable into the video output port on the rear panel of the device. 3. If you use a separate speaker and microphone, plug it into the control side analog signal audio port on the front panel of the device. 4. Connect the HDMI Computer with KVM cable (HDMI and USB) 5.
Keyboard Hot Key Switching Port Switch Operation: Left [shift] + Right [shift] Operation Instructions: 1. After the device is powered on, the default port is USB Type-C™ notebook computer connection port, and the red indicator light on the panel is lit. 2. Hotkey operation is performed once, and the port is changed once, thus circulating. 3. If the connected peripherals are printers, mobile hard disks… etc., please do not switch ports during data transmission, otherwise data transmission errors may occur.
Appendix Safety Instructions General This product is for indoor use only. Please read all the instructions and use them for future reference. Follow all warnings and instructions on the equipment. Do not place this equipment on any unstable plane (such as carts, shelves, tables, etc.). If this equipment falls, it will be seriously damaged. Do not use this equipment near water. Do not place this equipment next to or above the radiator or heating equipment.
Please select equipment such as sudden wave suppressor, regulator or uninterruptible power system (UPS) to help prevent your system from experiencing sudden and instantaneous increase and decrease of power. Please properly fix the connecting wire and power cord of the system to ensure that nothing presses on the cable.
Product Specification Parameters Model Port Selection Connector Console Port Controlled end port Display Keyboard Mouse PC graphics card PC keyboard mouse Notebook Power Supply (Optional) Audio Toggle switch USB2.0 Peripheral 10/100/1000Mbps LAN port (for Notebook PC) USB3.
Hereby Assmann Electronic GmbH, declares that the Declaration of Conformity is part of the shipping content. If the Declaration of Conformity is missing, you can request it by post under the below mentioned manufacturer address. www.assmann.
