User manual

- 6 -
1 Connects USB keyboard/mouse to the console front ports of KVM.
2 Connects all audio cable to each computer, KVM, speaker and micphone if
necessary.
3 Connects other USB devices to USB Hub downstream ports if necessary.
4 Connects the monitor DVI cable to the monitor output port of KVM.
5 Apply DC 5V power adaptor to power this KVM Switch.
6 Connects the DVI cable between the DVI port on the computer display card
and the DVI input port of KVM.
7 Make sure that the USB function of your computer is enabled and working
properly. Connects the USB cable Type-A end to the computer USB port, and
the cable Type-B end to the KVM’s USB upstream port.
8 Turn on the computers and make sure that the USB ports are enabled and
working properly.
3.3 USB enumeration time
This KVM Switch supports USB plug & play; all the components can be
added and removed at any time without the need to shut the unit down.
However, it will take several seconds to enumerate USB device, the time
consumed depends on the number of USB devices and the speed of
computer.