User manual

- 14 -
4.6 Hot Key Summary
Step 1 Step2 Action
Enable/Disable USB HUB Auto-Switch
Switch to host 1
Switch to host 2
Switch to host 3
Switch to host 4
Switch next host
Switch the upper one host
Switch the next one host
Enable/Disable Audio Auto-Switch
Switch to the audio 1
(Available only Audio Auto-Switch disabled)
Switch to the audio 2
(Available only Audio Auto-Switch disabled)
Switch to the audio 3
(Available only Audio Auto-Switch disabled)
Switch to the audio 4
(Available only Audio Auto-Switch disabled)
Switch to the HUB 1
(Available only USB Hub Auto-Switch disabled)
Switch to the HUB 2
(Available only USB Hub Auto-Switch disabled)
Switch to the HUB 3
(Available only USB Hub Auto-Switch disabled)
Switch to the HUB 4
(Available only USB Hub Auto-Switch disabled)
Start to Auto-Scan
No [Scroll
Lock] needed
*
Auto-Scan time interval is 5 seconds
(Available only when Auto-Scan function is ON)
*
Auto-Scan time interval is 10 seconds
(Available only when Auto-Scan function is ON)
*
Auto-Scan time interval is 15 seconds
(Available only when Auto-Scan function is ON)
*
Auto-Scan time interval is 20 seconds
(Available only when Auto-Scan function is ON)
* Notice: To adjust the interval time for Auto Scan, you do not need to press
the [Scroll Lock], and this can be used only by normal number key.