User manual

- 13 -
4.5 Auto-Scan Function: Auto-Scan Function:
4.5.1 Activate Auto-Scan
Press [Scroll Lock] + [Scroll Lock] + [S] will activate Auto-Scan function,
and the KVM will shift the display through all the ports sequentially.
4.5.2 Auto-Scan time Interval
The default time interval of Auto-Scan is 5 seconds. You can press the
numeric key [1], [2], [3], [4] to adjust the time interval during auto-scan.
The mapping table is:
n Scan Interval
[
1
]
5 sec.
[
2
]
10 sec.
[
3
]
15 sec.
[
4
]
20sec.
4.5.3 Stop Auto-Scan
 Press the SPACE key : The 4-Port USB KVM with USB 2.0 Hub with Audio
will stop the Auto-Scan operation by pressing Space key and will stay in the
current scanning port.
 Press any other key on the keyboard : Press any keys on keyboard
excluding number key [1], [2], [3] and [4] to turn off the Auto-Scan function,
the monitor screen will jump back to the original host port before auto-scan.