Manual

1
Product introduction
The DIGITUS® Gigabit 4PPoE Extender supports the latest networking technology to
extend your Ethernet signal to up to 100 meters. The extender is powered by
4PPoE (4-Pair Power over Ethernet or lower), so you do not need an additional
power adaptor and can use the device, even where there are no power cables or
sockets, to significantly increase the network range. With the PoE+ and 4PPoE
support, you can also connect devices with higher power consumption, such as
access points, POS systems or video telephones. Choose future-orientated 4PPoE
technology with the Gigabit 4PPoE Extender from DIGITUS®.
Front panel
The front panel consists of LED indications and network ports.
PoE Ports:
• PoE IN: Meets the following standards: IEEE802.3af (PoE), IEEE802.3at
(PoE+), IEEE802.3at (4PPoE)
• PoE OUT: Meets the following standards: IEEE802.3af (PoE), IEEE802.3at
(PoE+)
LED Lamp:
• Link/Act indicator: the light indicates the network connection through the
corresponding port.
Flicker indicates that the extender is sending or receiving data
• SPD indicator: when it lights, it indicates the link through that port is
successfully established at 1000Mbps. Otherwise, it will be off but still
functioning.
• PoE indicator: constant brightness indicates that the PD device is
connected to the corresponding port, and extinguished indicates that the
port is not powered or no PD device is found.