Gigabit 4PPoE Extender, 60W, 2 ports Manual DN-95127-1
Product introduction The DIGITUS® Gigabit 4PPoE Extender supports the latest networking technology to extend your Ethernet signal to up to 100 meters. The extender is powered by 4PPoE (4-Pair Power over Ethernet or lower), so you do not need an additional power adaptor and can use the device, even where there are no power cables or sockets, to significantly increase the network range.
Real panel: Hardware installation This chapter provides unpacking and installation information for the unmanaged PoE Extender. First step: open a seal Open the shipping carton and carefully unpack its contents. Please consult the packing list located in the User Manual to make sure all items are present and undamaged. If any item is missing or damaged, please contact the local reseller for replacement.
Network connection 3
Technical specifications Summary Fixed port Standards and protocols Forwarding Rate LED Indicators Operating temperature Storage temperature Relative humidity Exchange capacity MAC Addresses 2x10/100/1000Mbps PoE OUT ports 1x 10/100/1000Mbps PoE IN ports IEEE802.3 10Base-T Ethernet standard IEEE802.3u 100Base-TX Fast Ethernet standard IEEE802.3ab 1000Base-T Ethernet standard IEEE802.3z Gigabit Ethernet (fiber) IEEE802.3x Full duplex flow control and Backpressure Half duplex flow control IEEE802.
This is a Class A product. In home environment, this product may cause radio interference. In this case, the user may be required to take appropriate measures. Hereby Assmann Electronic GmbH, declares that the Declaration of Conformity is part of the shipping content. If the Declaration of Conformity is missing, you can request it by post under the below mentioned manufacturer address. www.assmann.
