Instructions

Step 2:
CONNECTION (T568A / T568B)
Fix the data cable with a cable clamp and tighten
the screw. Both data cables are  xed at the same
time.
Lay the wires in the insulation displacement
clamp according to the speci ed coding. The
twisting must be maintained up to the insulation
displacement terminal!
Schritt 2:
ANSCHLUSS (T568A / T568B)
Fixieren Sie das Datenkabel mittels Kabelschelle
und ziehen Sie die Schraube an. Es werden
gleichzeitig beide Datenkabel  xiert.
Legen Sie die Adern gemäß vorgegebener Kodie-
rung in der Schneidklemme. Die Aderverdrillung
muss bis zur Schneidklemme aufrechterhalten
bleiben!
Anlegewerkzeug
Punch tool
DN-LSA-PT
T568A
Belegung nach T568A
Con guration according to T568A
Links/Left
Kabeleinführung linke Seite.
Cable entry left side.
Links/Left
Kabeleinführung linke Seite.
Cable entry left side.
Rechts/Right
Kabeleinführung rechte Seite.
Cable entry right side.
Rechts/Right
Kabeleinführung rechte Seite.
Cable entry right side.
T568B
Belegung nach T568B
Con guration according to T568B
8 37 5 26 4 1 8 37 5 26 4 1
8 37 5 26 4 1 8 37 5 26 4 1
8 37 5 26 4 1 8 37 5 26 4 1
8 37 5 26 4 1 8 37 5 26 4 1
Pressen Sie die Adern mithilfe eines Anlegewerk-
zeugs (DN-LSA-PT) in die Schneidklemme und
schneiden Sie die überschüssigen Kabelenden ab.
Press the wires into the insulation displa-
cement clamp with the help of a punch tool
(DN-LSA-PT) and cut off the excess wire ends.
DE - Hiermit erklärt die ASSMANN Electronic GmbH, dass sich der Artikel in Übereinstimmung mit
den Anforderung und Vorschriften der RoHS Richtlinie 2011/65/EU be ndet. Die vollständige Kon-
formitätserklärung können Sie postalisch unter der unten genannten Herstelleradresse anfordern.
EN - ASSMANN Electronic GmbH declares that the product complies with the requirements and pro-
visions of RoHS directive 2011/65/EU. You can request the complete Declaration of Conformity by
post at the manufacturer’s address as stated below.
FR - Par la présente, Assmann Electronic GmbH certi e que le produit est conforme aux exigences
et aux réglementations des directives RoHS 2011/65/EU. La déclaration de conformité complète
peut être demandée par post à l´adresse du fabricant ci-dessous.
ASSMANN Electronic GmbH,
Auf dem Schüffel 3, 58513 Lüdenscheid, Germany
Manufactured in P.R.C.