User`s manual

DN-7039-B 108M Wireless Router User Guide
¾ Current Statistics Status default value is disabled. To
¾
¾
IP
The IP Address displayed with statistics
- Enable or Disable. The
enable, click the Enable button. If disabled, the function of DoS protection in
Security settings will be ineffective.
Packets Statistics Interval - The default value is 10. Select a value between 5 and
60 seconds in the pull-down list. The Packets Statistic interval indicates the time
section of the packets statistic.
Sorted Rules - Select sorted rule of statistics results as your desired.
¾ Statistics Table:
Address
Packets
y the router.
The total amount of packets received and transmitted b
Total
The total amount of bytes received and transmitted by the router.
Bytes
s
Packets
The total amount of packets received and transmitted in the last
Packet
Statistic interval seconds.
The total amount of bytes received and transmitted in the last Packets
Bytes
Statistic interval seconds.
The total amount of the ICMP packets transmitted to WAN in the last
ICMP Tx
Packets Statistic interval seconds.
Current
The total amount of the UDP packets transmitted to WAN in the last
UDP Tx
Packets Statistic interval seconds.
The total amount of the TCP SYN packets transmitted to WAN in the last
TCP
SYN Tx Packets Statistic interval seconds.
lick the Save tic interval value.
C button to save the Packets Statis
Click the Auto-refresh checkbox to refresh automatically.
Refre h immediately.
Click the sh button to refres
- 60 -