User`s manual

DN-7039-B 108M Wireless Router User Guide
1. Do not turn off the router or press the Reset button while the firmware is
2. ot after the Upgrading has been finished.
1.3 Factory Defaults
ws you to restore the factory default settings for the
being upgraded.
The router will rebo
5.1
This page (shown in figure 5-50) allo
router.
Figure 5-50 Restore Factory Default
Click the Restore button lues.
8.1.1
5.0
ote: Any settings you have saved will be lost when the default settings are restored.
1.4 Backup and Restore
-51) allows you to save current configuration of router as
to reset all configuration settings to their default va
• The default User Name: admin
• The default Password: admin
• The default IP Address: 192.16
• The default Subnet Mask: 255.255.25
N
5.1
This page (shown in figure 5
backup or restore the configuration file you saved before.
Figure 5-51 Backup & Restore Configuration
¾ Click the Backup button to save all configuration settings as a backup file in your
¾ ter's configuration, follow these instructions:
• t to restore.
ote: The current configuration will be covered with the uploading configuration file. The
local computer.
To restore the rou
click the Browse button to select the backup file which you wan
• Click the Restore button.
N
restoration process lasts for 20 seconds and the router will restart automatically. Keep
- 57 -