Datasheet

108M Wireless USB Adapter User Guide
Chapter 3: Configuration
The Wireless USB Adapter can be configured by Wireless Client Utility. This section
describes how to configure your Wireless USB Adapter for wireless connectivity on your
Wireless Local Area Network (WLAN) and use the data security encryption features.
After installing the Adapter, the Adapter’s tray icon
will appear in your system tray.
It appears at the bottom of the screen, and shows the signal strength using color and the
received signal strength indication (RSSI).
If the icon is gray, there is no connection.
If the icon is red, there is poor signal strength and the RSSI is less than 5dB.
If the icon is yellow, there is poor signal strength and the RSSI is between 5dB
and 10dB.
If the icon is green, there is good signal strength and the RSSI is between 10dB
and 20dB.
If the icon is green, there is excellent signal strength and the RSSI is more than
20dB.
Double-click the icon and the Current Status screen of Wireless Client Utility will appear.
From this screen, you can view the strength of the Adapter’s signal and the quality of its
connection. You can also click Advanced to view additional status information about the
current wireless connection. To Edit or add a configuration profile, click the Profile
Management tab. To Display current diagnostics information, click the Diagnostics tab.
You can also run the Utility by clicking the Start>Program> Wireless >108M USB
Wireless Client Utility. The Wireless client Utility provides a complete and easy to use
set of tools to:
 Display current status information
 Edit and add configuration profiles
 Display current diagnostics information
The section below introduces these above capabilities.
3.1 Current Status
The Current Status tab contains general information about the program and its
operations. The Current Status tab does not require any configuration.
- 8 -