User`s manual

Routing Table page allows you to set routing rules to this router.
This includes static routing and dynamic routing.
Static Route:
Input the IP address of a destination network or a host of the
routing rule
. It could be a host address like 192.168.123.100 or a
network address, such as 192.168.0.0. Click Add to add the rule to
the routing table or select a rule from the table and then click Del to
delete the rule.
Dynamic Route:
If you don’t want to set any dynamic routing rule, select Disable.
The default value is Rip2 and the router will build a routing table
and get a path to the destination automatically.
4.2.4 Miscellaneous
25