User manual

11
3.3.3 Color
Adjust the color performance from Brightness, Contract and Saturation. Click and drag the slider to preview the
color change on the right side of ths page and adjust the image color.
To restore the default values, click “Back to Default”.
3.3.4 Advance
Adjust the camera parameters if necessary.
Item Description
Back Light It is the function to adjust the image to compensate for an area that is overpowered by brightness because of excessive light.
The image will be properly exposed for clearness. Select to activate (ON) or disable (OFF) this function.
Note: This function is available only in the day mode.
Mirror Select “ON” to rotate the images horizontally based on your installation situation when necessary.
Flip Select “ON” to rotate the image 180° when necessary.
IR Control Select “Auto” to automatically enable IR LEDs at night or in the dark environment, “On” to always enable IR LEDs, or “OFF”
to disable this function.
Sharpness Sharpness enhances the clarity of image detail by adjusting the aperture and sharpening the edges in the pictures.
Hold and drag the slider to adjust the level of sharpness from 0 ~ 100. The higher the value, the sharper the image.
3.4 Trigger
3.4.1 Trigger
You can configure how this camera reacts when there’s a motion event.