NETWORK BULLET CAMERA USER MANUAL Please read instructions thoroughly before operation and retain it for future reference.
IMPORTANT SAFEGUARD All lead-free products offered by the company comply with the requirements of the European law on the Restriction of Hazardous Substances (RoHS) directive, which means our manufacture processes and products are strictly “lead-free” and without the hazardous substances cited in the directive. The crossed-out wheeled bin mark symbolizes that within the European Union the product must be collected separately at the product end-of-life.
MPEG4 Licensing THIS PRODUCT IS LICENSED UNDER THE MPEG4 VISUAL PATENT PORTFOLIO LICENSE FOR THE PERSONAL AND NON-COMMERCIAL USE OF A CONSUMER FOR (i) ENCODING VIDEO IN COMPLIANCE WITH THE MPEG4 VISUAL STANDARD (“MPEG-4 VIDEO”) AND/OR (ii) DECODING MPEG4 VIDEO THAT WAS ENCODED BY A CONSUMER ENGAGED IN A PERSONAL AND NON-COMMERCIAL ACTIVITY AND/OR WAS OBTAINED FROM A VIDEO PROVIDER LICENSED BY MPEG LA TO PROVIDE MPEG4 VIDEO. NO LICENSE IS GRANTED OR SHALL BE IMPLIED FOR ANY OTHER USE.
TABLE OF CONTENTS 1. OVERVIEW......................................................................................................................................... 1 1.1 Product Features ....................................................................................................................................... 1 1.2 Package Content ....................................................................................................................................... 1 1.3 Cable Overview .......
1. OVERVIEW 1.1 Product Features Easy network setup with your iPhone / iPad ONVIF standard supported to simplify system integration 35 IR LEDs built-in for night surveillance Remote Surveillance -- Fully compatibility on iPhone & iPad, and Internet Explorer® on Windows® operating system 1.2 Package Content □ Network camera □ Quick Setup with iPhone / iPad □ Bracket 1.3 Cable Overview Cable Description Power cable Connect to DC12V power supply. Note: The power adapter is optional.
2. CAMERA ACCESS WITH INTERNET EXPLORER This network camera can be accessed via Microsoft® Internet Explorer® and iPhone / iPad / Android mobile devices with our self-developed program “EagleEyes” installed depending on different using situations. Note: For details about accessing network cameras via iPhone / iPad / Android mobile devices, please refer to http://www.eagleeyescctv.com. Before using the camera, make sure you have configured the network settings, and the network connection is fine.
Function Icon Live Config. User Level Description Supervisor / Power User / Normal User / Guest Switch to the live view page. Switch to the system configuration page, and the functions available for “Supervisor” and “Power User” are different. Supervisor Media Type -- For details, please refer to “3.1 System configuration menu” at page 4. Supervisor / Power User / Normal User / Guest Select the image player from the drop-down list: H.
3. CAMERA CONFIGURATIONS Users can further configure this network camera by accessing via Internet Explorer. 3.1 System configuration menu Click “Config.” to enter the configuration page. Note: You need to be “Supervisor” to enter the system configuration page. If you’re not a “Supervisor”, please re-log into the camera with the correct user name and password. The functions are categorized into six menus: Network, Camera, Record Timer, Storage, Trigger and General.
Main Menu Sub-Menu Reference 1. Select the language of the web browser. General General 2. Check the MAC address of the camera. 3. Lock camera access after the specified time. Time Set daylight saving time and the current time. Server Log Check the system event logs. Online Check the current online user(s). Account Google Maps 1. Create a new user account with different access privilege. 2. Modify or delete an existing user account. Allow you to know where the network camera is. 1.
3.2.4 SNTP SNTP (Simple Network Time Protocol) is used to synchronize your camera time with the networked computer systems. Function Description GMT Once users choose the time zone, the network camera will adjust the local area time of the system automatically. NTP Server Simply use the default SNTP server (For example, tock.stdtime.gov.tw) or change to another server with which users are familiar. Sync.
Function Description Verify Password Some mail servers are required to verify the password. Please enter the “user name” and “password”. E-Mail Address List Add the e-mail address(s) of the assigned recipient(s). Test When all information is entered, click “Test Mail” to try if the receipt. 3.2.7 SMS Note: Before using this function, you need to apply an API ID from the mobile messaging company, Clickatell, and you will be charged starting from the 11th message.
3.2.8 Filter Choose to permit or block the IP address(es) which can access this camera, and click “Save” to confirm. Function Description Filter Configuration Error Count Set the maximum count for login failure. When the maximum count is reached, the IP address trying to access the network camera will be locked. Error Lock Time Set the lock time in minutes when the maximum count of error login for an IP address is reached.
Double-click it to quickly open the web browser for camera access. Port Mapping (Available only in UPnP) This function can eliminate the need to additionally access the router for port forwarding. For details, please refer to “Advanced Network Setup” from www.surveillance-download.com/user/n257.swf. Note: Before using this function, make sure your router supports UPnP, and this function is enabled. If not, please access your router additionally for port forwarding.
Function Description Port Range The port range used by RTP is limited, and preserving 100 ports between the start port and end port is necessary. Start Port The range of the start port is 1024 ~ 65434. End Port The range of the end port is 1124 ~ 65534. Multicast Address and port for H264 / MPEG4 / JPEG transmission Set a specific address and port for multicast of each stream format (H264/ MPEG4/ JPEG). Time to Live (TTL) The range of Time to Live of the package is between 1 ~ 255.
3.3.3 Color Adjust the color performance from Brightness, Contract and Saturation. Click and drag the slider to preview the color change on the right side of ths page and adjust the image color. To restore the default values, click “Back to Default”. 3.3.4 Advance Adjust the camera parameters if necessary. Item Description Back Light It is the function to adjust the image to compensate for an area that is overpowered by brightness because of excessive light.
Detect Item Description Motion Enable or disable motion detection. Motion detection is not supported when the stream format is Motion JPEG. When “Enable” is selected, click “Detection” to enter the motion detection area setting page as follows: Sensitivity: Set the detection sensitivity from the drop-down list: High, Normal or Low. Area Setting: Set the motion detection area by selecting the area grids with your mouse.
3.5.2 Time Set daylight saving time and the current time, and click “Save” to confirm. Function Description Time Configuration Date Set the current date. Time Set the current time. Daylight Saving Time Configuration Daylight Saving Time Specify whether to use daylight saving time (Enable / Disable). If this function is enabled, set the time period (Start Time / End Time), and adjust the daylight saving time in hours (Adjust Time). 3.5.
3.5.4 Online You can check the current online user(s) with respective online information. To refresh the list, click “Reload”. To allow anonymous login, select “Enable” in “Anonymous Viewer Login”. To disable image code verification at login, select “No” in “Login with CAPTCHA Image”. 3.5.5 Account You can create a new account with different user access privilege, or delete or modify an existing account setting. How to create a new account Step1: Click “New”, and fill in the following columns.
How to modify or delete an existing account Step1: Select the account you want to modify or delete. Step2: To modify the account, click “Edit” to change the settings, and click “Save”. To remove the account, click “Delete”. Note: It’s not allowed to remove an account when there’s only one account in the account list. 3.5.6 Google Maps This function is used to let you know where the network camera is. The system will prompt you to apply a Goole Maps Key if your access is denied.
3.5.7 Maintenance Firmware Upgrade This function is used when users need to upgrade the camera for function scalability. Note: Before using this function, make sure you have the correct upgrade files provided by your installer or distributor. Note: The event videos saved in the camera will be removed after firmware upgrade. Make sure you’ve copied important events to your PC before firmware upgrade.
APPENDIX 1 PRODUCT SPECIFICATIONS AVN257 ▓ Network Network Compression H.264 / MPEG4 / MJPEG Multiple Video Streaming (Encode Modes, IPS, Resolution) 3 (H.
APPENDIX 2 BIT RATE TABLE FOR REFERENCE The data below is for reference only. The bit rates listed here may vary depending on the resolution, image quality & frame rate you choose, the complexity of your monitoring area, and how often the moving objects show in your monitoring area. Testing Environment Place: Office Entrance Network translation: H.
APPENDIX 3 API ID APPLICATION FOR SMS MESSAGING To allow the camera automatically sending a text message when an event happens, you need to apply an API ID from Clickatell, one mobile messaging company, first. Note: The SMS messaging is not totally free. You will be charged starting from the 11th message. Please follow the steps below for application. Step1: Go to http://www.clickatell.com/login.php. In “New Customers”, select “Clickatell Central (API)” from the drop-down list.
Click the link in the Email to complete account activation, and enter the login page as follows. Enter the password you set, and click “Login”. Step3: Enter the mobile phone number (including your country code) you want the text message to be sent, and click “SEND ACTIVATION CODE”. The system will send an activation code to that number for verification. Check if you receive a text message from Clickatell. Step4: Go back to Clickatell, and click the tab “Manage my Products”.
APPENDIX 4 Q&A For more details about Q&A, please visit our official website: www.eagleeyescctv.com/supp_QnA.aspx. Question I can connect to this camera in my house or office where it’s installed with wireless network. But when I leave my house or office, I can’t connect to it from my mobile phone (with 3G network), or other PC (connected to Internet). Why? My live images are not fluent. Why? Answer You didn’t configure this camera to Internet, but only in LAN.
