User`s manual
Table Of Contents
- Chapter1 Introduction
- Chapter2 Product Overview
- Chapter3 Basic Installation
- Chapter4 Adding Printers in Windows
- 4.1 Overview of Installation Methods
- 4.2 Connecting the Server
- 4.3 Setting up Local Windows Printer Driver
- 4.4 Adding Network Printers in Windows
- 4.4.1 Using Standard Windows Methods for LPR Printing Protocol
- 4.4.2 Using Control Center for LPR Printing
- 4.4.3 Using Standard Windows Method for Raw TCP Printing
- 4.4.4 Using Control Center for Raw TCP/JetDirect Printing
- 4.4.5 Using Standard Windows Methods for SMB/CIFS Printing
- 4.4.6 Using Control Center for SMB/CIFS Printing
- 4.4.7 Using Standard Windows Method for IPP Printing
- Chapter5 Adding Printers in Unix/Linux
- Chapter6 File Server Function
- Chapter7 Scan Server Function
- Chapter8 Control Center
- Chapter9 Server’s Web Pages
- Chapter10 Email Alerting
- Chapter11 SNMP
- Chapter12 Troubleshooting
- Chapter13 Restore Factory Defaults
- Chapter14 Upgrade New Firmware
- Chapter15 Init Button
Chapter14 Upgrade New Firmware
This chapter describes how to upgrade your new firmware. You can use the following
Procedures to upgrade new firmware
Procedure A: Using PC User Software
1. Open the Digitus DN-13007 MFP Server Control Center. It will automatically
search the existing servers and display their status.
2. Select the server that you want to upgrade the firmware. Double click the
selected server and enter Administrator Name and Password. Please note that
the default values of Administrator and Password are admin.
3. Select the Maintenance button.
4. Click Open your new firmware file and click Upgrade.
75
5. Wait for 10 seconds for system reboot.