User`s manual
Table Of Contents
- Chapter1 Introduction
- Chapter2 Product Overview
- Chapter3 Basic Installation
- Chapter4 Adding Printers in Windows
- 4.1 Overview of Installation Methods
- 4.2 Connecting the Server
- 4.3 Setting up Local Windows Printer Driver
- 4.4 Adding Network Printers in Windows
- 4.4.1 Using Standard Windows Methods for LPR Printing Protocol
- 4.4.2 Using Control Center for LPR Printing
- 4.4.3 Using Standard Windows Method for Raw TCP Printing
- 4.4.4 Using Control Center for Raw TCP/JetDirect Printing
- 4.4.5 Using Standard Windows Methods for SMB/CIFS Printing
- 4.4.6 Using Control Center for SMB/CIFS Printing
- 4.4.7 Using Standard Windows Method for IPP Printing
- Chapter5 Adding Printers in Unix/Linux
- Chapter6 File Server Function
- Chapter7 Scan Server Function
- Chapter8 Control Center
- Chapter9 Server’s Web Pages
- Chapter10 Email Alerting
- Chapter11 SNMP
- Chapter12 Troubleshooting
- Chapter13 Restore Factory Defaults
- Chapter14 Upgrade New Firmware
- Chapter15 Init Button
13.2 Using Control Center
1. Start Control Center and Auto-searching MFP server window will appear.
2. If the tool finds MFP servers in your local area network, then you have to
select a MFP server from the server list.
3. Double click the highlight list and type the server’s administrator (default:
admin) and password (default: admin).
4. After you login successfully, from the Server menu, select Maintenance. The
Maintenance dialog appears.
5. Click Factory Default.
13.3 Using Init Button
Simultaneously press Init button and power on (plug the power adaptor line) the
server until LED indicators of Power, USB1 and USB2 blink. After that, plug off the
power adaptor and then plug on the power adapter to restart the server. Finally, the
server will operate using the Factory Default values.
13.4 Default Parameters List
Host Information
Comment (Optional): Digitus DN-13007 USB MFP Server
Host Name: DN-13007
Workgroup: WORKGROUP
Codepage of File Server: Western European
TCP/IP
Automatically get IP using DHCP: enabled
- Manual DNS: none
DHCP Failed:
- IP : 192.168.1.100
- Subnet Mask: 255.255.255.0
Static IP: disabled
- IP: 192.168.1.100
- Subnet Mask: 255.255.255.0
- Gateway: none
- DNS: none
Protocols
IPP Printing: enabled
LPR Printing: enabled
- Queue Name (USB1): USB1_LQ
73
- Queue Name (USB2): USB2_LQ