User`s manual

 SNMP: You can set community and some parameters for SNMP server.
Furthermore, you can enable SNMP v3 for more security.
 Set SNMP Configuration
5 Authentic Community: set Community name of SNMP server.
5 Trap Community: set Trap Community name for SNMP server to send trap
packets.
5 Trap Address: type an IP address to send the Trap packet.
5 SysContact: type some letters for variable of SysContact that represents
the name of system contact.
5 SysName: type some letters for variable of SysName that represents the
name of system.
5 SysLocation: type some letters for variable of SysLocation that represents
the location of system.
5 EnableAuthenTrap: type 1 or 2 for the variable of EnableAuthenTrap that
represents to enable (1) or disable (2) to send Trap packets receiving the
wrong Community name.
 SNMP V3
5 Enable SNMP V3: select or clear Enable SnmpV3 support
5 User Security name: set user security name of SNMP v3
5 Auth Password: set authentication password of SNMP v3.
5 Privacy Password: set privacy password of SNMP v3.
59