User`s manual
Table Of Contents
- Chapter1 Introduction
- Chapter2 Product Overview
- Chapter3 Basic Installation
- Chapter4 Adding Printers in Windows
- 4.1 Overview of Installation Methods
- 4.2 Connecting the Server
- 4.3 Setting up Local Windows Printer Driver
- 4.4 Adding Network Printers in Windows
- 4.4.1 Using Standard Windows Methods for LPR Printing Protocol
- 4.4.2 Using Control Center for LPR Printing
- 4.4.3 Using Standard Windows Method for Raw TCP Printing
- 4.4.4 Using Control Center for Raw TCP/JetDirect Printing
- 4.4.5 Using Standard Windows Methods for SMB/CIFS Printing
- 4.4.6 Using Control Center for SMB/CIFS Printing
- 4.4.7 Using Standard Windows Method for IPP Printing
- Chapter5 Adding Printers in Unix/Linux
- Chapter6 File Server Function
- Chapter7 Scan Server Function
- Chapter8 Control Center
- Chapter9 Server’s Web Pages
- Chapter10 Email Alerting
- Chapter11 SNMP
- Chapter12 Troubleshooting
- Chapter13 Restore Factory Defaults
- Chapter14 Upgrade New Firmware
- Chapter15 Init Button
5. Click Preview button.
6. Adjust the window size to be scanned.
7. Click Scan button.
7.3 Using the Shared Scanner in Linux
7.3.1 Using XSane in Redhat Linux
1. Download SANE-Backends from
http://www.sane-project.org.
2. Download and install SANE-frontends: XSane (UNIX binary) from
http://www.xsane.org.
3. Edit \etc\sane.d\net.conf and put the IP address of the MFP server where the
scanner is connected into one line, e.g:
192.168.1.100.
4. To start the application, select Main Menu button (on the Panel)->
Applications->Grphics -> Scanning.
5. Perform scan function.
53