User`s manual
Table Of Contents
- Chapter1 Introduction
- Chapter2 Product Overview
- Chapter3 Basic Installation
- Chapter4 Adding Printers in Windows
- 4.1 Overview of Installation Methods
- 4.2 Connecting the Server
- 4.3 Setting up Local Windows Printer Driver
- 4.4 Adding Network Printers in Windows
- 4.4.1 Using Standard Windows Methods for LPR Printing Protocol
- 4.4.2 Using Control Center for LPR Printing
- 4.4.3 Using Standard Windows Method for Raw TCP Printing
- 4.4.4 Using Control Center for Raw TCP/JetDirect Printing
- 4.4.5 Using Standard Windows Methods for SMB/CIFS Printing
- 4.4.6 Using Control Center for SMB/CIFS Printing
- 4.4.7 Using Standard Windows Method for IPP Printing
- Chapter5 Adding Printers in Unix/Linux
- Chapter6 File Server Function
- Chapter7 Scan Server Function
- Chapter8 Control Center
- Chapter9 Server’s Web Pages
- Chapter10 Email Alerting
- Chapter11 SNMP
- Chapter12 Troubleshooting
- Chapter13 Restore Factory Defaults
- Chapter14 Upgrade New Firmware
- Chapter15 Init Button
7.2.2 Using Windows Applications
Prior to using scanning functions in Windows applications such as MS Word,
Photoshop …etc, you have to install network scanner’s TWAIN driver in advance.
When you install MFP Server Control Center tool, it will also install this TWAIN driver.
Example: Using Photoshop
1. Start Photoshop, click File ->Import->Digitus DN-13007 Network Scanner
2. Select a server’s IP address or type a server IP address in Server Information
box. You can click Search Server button
to search existing MFP servers in
your network.
3. Click Connect to Network Scanner button
in Server Information box.
4. Select your scanner in Server Information box.
52