User`s manual
Table Of Contents
- Chapter1 Introduction
- Chapter2 Product Overview
- Chapter3 Basic Installation
- Chapter4 Adding Printers in Windows
- 4.1 Overview of Installation Methods
- 4.2 Connecting the Server
- 4.3 Setting up Local Windows Printer Driver
- 4.4 Adding Network Printers in Windows
- 4.4.1 Using Standard Windows Methods for LPR Printing Protocol
- 4.4.2 Using Control Center for LPR Printing
- 4.4.3 Using Standard Windows Method for Raw TCP Printing
- 4.4.4 Using Control Center for Raw TCP/JetDirect Printing
- 4.4.5 Using Standard Windows Methods for SMB/CIFS Printing
- 4.4.6 Using Control Center for SMB/CIFS Printing
- 4.4.7 Using Standard Windows Method for IPP Printing
- Chapter5 Adding Printers in Unix/Linux
- Chapter6 File Server Function
- Chapter7 Scan Server Function
- Chapter8 Control Center
- Chapter9 Server’s Web Pages
- Chapter10 Email Alerting
- Chapter11 SNMP
- Chapter12 Troubleshooting
- Chapter13 Restore Factory Defaults
- Chapter14 Upgrade New Firmware
- Chapter15 Init Button
Chapter7 Scan Server Function
This chapter explains how to use the scan server function of this product. The scan
server function enables a USB scanner of HP all-in-one series, connected to this
product, to be shared as a network scanner. The scan server function is available in
any platform that can use SANE client.
7.1 Connecting HP All-in-one MFP to the Server
er
DN-13007
HP MFP
Scanner
LAN HUB/Switch
7.2 Using the Shared Scanner in Windows
7.2.1 Using Control Center
1. Start MFP Server Control Center, select your MFP server, and click Digitus
Network Scanner.
2. Select your scanner for USB1 port or USB2 port.
50