User`s manual
Table Of Contents
- Chapter1 Introduction
- Chapter2 Product Overview
- Chapter3 Basic Installation
- Chapter4 Adding Printers in Windows
- 4.1 Overview of Installation Methods
- 4.2 Connecting the Server
- 4.3 Setting up Local Windows Printer Driver
- 4.4 Adding Network Printers in Windows
- 4.4.1 Using Standard Windows Methods for LPR Printing Protocol
- 4.4.2 Using Control Center for LPR Printing
- 4.4.3 Using Standard Windows Method for Raw TCP Printing
- 4.4.4 Using Control Center for Raw TCP/JetDirect Printing
- 4.4.5 Using Standard Windows Methods for SMB/CIFS Printing
- 4.4.6 Using Control Center for SMB/CIFS Printing
- 4.4.7 Using Standard Windows Method for IPP Printing
- Chapter5 Adding Printers in Unix/Linux
- Chapter6 File Server Function
- Chapter7 Scan Server Function
- Chapter8 Control Center
- Chapter9 Server’s Web Pages
- Chapter10 Email Alerting
- Chapter11 SNMP
- Chapter12 Troubleshooting
- Chapter13 Restore Factory Defaults
- Chapter14 Upgrade New Firmware
- Chapter15 Init Button
4. Select your codepage form File Server Codepage box and click Apply.
6.5 Adding Your USB Mass Storages to Network with Security
You can use the following protocols to share your USB Mass Storages with user level
security in network:
SMB/CIFS: NetBIOS over TCP/IP
FTP
The protocols are shown in Supported Protocols box of MFP Control Center or
server’s web pages.
6.5.1 Setting up File Server Using Control Center
1. Start Digitus DN-13007 MFP Server Control Center and Auto-searching MFP
server window will appear.
2. If the tool finds MFP servers in your local area network, then you have to select
a MFP server from the server list.
3. Double click the highlight list and type the server’s administrator (default:
admin) and password (default: admin).
4. After you login successfully, click Supported Protocols.
43