User`s manual
Table Of Contents
- Chapter1 Introduction
- Chapter2 Product Overview
- Chapter3 Basic Installation
- Chapter4 Adding Printers in Windows
- 4.1 Overview of Installation Methods
- 4.2 Connecting the Server
- 4.3 Setting up Local Windows Printer Driver
- 4.4 Adding Network Printers in Windows
- 4.4.1 Using Standard Windows Methods for LPR Printing Protocol
- 4.4.2 Using Control Center for LPR Printing
- 4.4.3 Using Standard Windows Method for Raw TCP Printing
- 4.4.4 Using Control Center for Raw TCP/JetDirect Printing
- 4.4.5 Using Standard Windows Methods for SMB/CIFS Printing
- 4.4.6 Using Control Center for SMB/CIFS Printing
- 4.4.7 Using Standard Windows Method for IPP Printing
- Chapter5 Adding Printers in Unix/Linux
- Chapter6 File Server Function
- Chapter7 Scan Server Function
- Chapter8 Control Center
- Chapter9 Server’s Web Pages
- Chapter10 Email Alerting
- Chapter11 SNMP
- Chapter12 Troubleshooting
- Chapter13 Restore Factory Defaults
- Chapter14 Upgrade New Firmware
- Chapter15 Init Button
Chapter1 Introduction
Thank you for purchasing this Digitus DN-13007 USB MFP Server (in the following
referred to as “Server”). This server is designed to connect your AIO/MFPs
(All-In-One/Multifunction Peripheral), printers, USB mass storages (hard drives, flash
drives, and memory card readers), and scanners, to your network, allowing all
network users access to these shared USB devices resources.
1.1 About this Manual
This manual provides introductory information as well as detailed instructions on how
to set up and manage this server in various network environments. To fully benefit
from this manual, you should be familiar with basic networking principles.
These instructions are based on the settings in a new MFP server. To reload the Factory
Parameters, you can reset this server back to Factory Default, which will restore most
of the settings. For details, please refer to the chapter “Restore Factory Defaults”.
1.2 Support Services
Should you require any technical assistance, please contact your product reseller. Or
you can visit our website at http://www.digotus.info for latest product information.
This manual is subject to changes without prior notice.
Chapter2 Product Overview
2.1 Package Contents
Verify that nothing is missing from the package by using the checking list below.
Please contact your dealer if anything is missing or damaged. All packing materials are
recyclable. Please confirm the items in the package below:
This Server
CD (Control Center and User’s Manual)
Power Adaptor
Quick Installation Guide
2.2 Product CD
This CD provides an easy-to-use Control Center software for Windows PC, and the
User’s Manual.
2.2.1 Start-up Procedures for Windows
If your computer is configured to auto start CDs, this CD will start automatically when
inserted. You can also navigate to the CD and start the autorun.exe file from within the
Windows file manager.
4