User`s manual
Table Of Contents
- Chapter1 Introduction
- Chapter2 Product Overview
- Chapter3 Basic Installation
- Chapter4 Adding Printers in Windows
- 4.1 Overview of Installation Methods
- 4.2 Connecting the Server
- 4.3 Setting up Local Windows Printer Driver
- 4.4 Adding Network Printers in Windows
- 4.4.1 Using Standard Windows Methods for LPR Printing Protocol
- 4.4.2 Using Control Center for LPR Printing
- 4.4.3 Using Standard Windows Method for Raw TCP Printing
- 4.4.4 Using Control Center for Raw TCP/JetDirect Printing
- 4.4.5 Using Standard Windows Methods for SMB/CIFS Printing
- 4.4.6 Using Control Center for SMB/CIFS Printing
- 4.4.7 Using Standard Windows Method for IPP Printing
- Chapter5 Adding Printers in Unix/Linux
- Chapter6 File Server Function
- Chapter7 Scan Server Function
- Chapter8 Control Center
- Chapter9 Server’s Web Pages
- Chapter10 Email Alerting
- Chapter11 SNMP
- Chapter12 Troubleshooting
- Chapter13 Restore Factory Defaults
- Chapter14 Upgrade New Firmware
- Chapter15 Init Button
4.4.2 Using Control Center for LPR Printing
Windows Platform: Windows 2000, XP and 2003
1. Start MFP Server Control Center, select your MFP server and click Add Printer.
2. Select USB1 Port or USB2 Port to add the printer in Add the printer box,
choose to use Host Name or IP address to represent MFP server in Select IP
address or Host Name in printer port box, and select the network printing
protocol of Printing with LPR (Line Printer Remote).
# If your server is running on a different LAN than your Windows PC such as
Internet PC, you must choose IP address in Select IP address or Host Name
in printer port box.
3. Click Apply.
22