User manual

8. Restore Factory Defaults

You may restore the Server’s default parameters by one of the following methods.

8.1 Using the Server’s Web Pages

1. Go to the Server’s web page and click CONFIG

2. Enter administrator (default: admin) and password (default: admin).

3. Click Maintenance.

4. Click Factory Default.

5. Click Yes to confirm

8.2 Using Init Button

Plug in the power adaptor while pressing the Init button until LED indicators of USB1

and USB2 blink. (For 1-port model, only USB LED will blink.) After that, plug off the

power adaptor and then plug in the power adapter again to restart the Server. Finally,

the Server will operate using the Factory Default values.

8.3 Default Parameters List

General Information

 Server Name: DIGITUS

TCP/IP

 Automatically get IP by DHCP: Enabled

 Static IP: Disabled

- IP Address: 192.168.1.100

- Subnet Mask: 255.255.255.0

User Accounts

 Administrator: admin

 Password: admin