User manual

26
7. Troubleshooting
This chapter provides useful information to help you resolve difficulties that you may
experience with your Server. Fault symptoms, possible causes, and remedial actions are
provided within a quick reference table. This Server’s USB ports only support MFPs, printers,
scanners, mass storage, and USB cameras.
7.1 LED Indicators
Indicators Behavior Description
Power On Power On
Off Power off/System error
Link On Network connected
Off No physical connection to network
Status Blinking Activity on network
Off No activity on network
USB On USB device connected
Blinking Connected USB device error
Off No physical connection to USB device
7.2 Firewall
If a firewall software has been installed on your PC, it may block the communication
between the PC and the USB device server so that the USB device server can not work
properly. To solve this problem, either disable the firewall or configure the firewall to
allow the following TCP and UDP ports:
7303, 7305, 20005, 30201, 30202, 30203