User manual

16
F. Then try to issue a print job to the desired printer. You will see the Control Center
will automatically do a connect operation. Then, the print job will be issued to
that printer.
G. Even you already properly setup an auto-connected printer, the Control Center
must be running (in the background) while a print job is issued. This means
you’d better run the Control Center every time after you login Windows. In order
to skip this manual operation, you can make the Control Center be run
automatically after you login Windows. To do this, choose the “Configuration”
item in the “Tools” menu. The following window will appear. Click on the check
box and then on the “OK” button. This feature is enabled by default.
If you would like to break the association between the Windows printer and the
physical printer, just click on the association and click the “Delete” button in the
“Auto-Connected Printer List”.