User manual

4.5 Using the USB Device Server

A. In the Control Center, click the USB device server that has the desired

USB device attached.

B. Click the desired USB device.

C. Click the “Connect” button. Then the message “Manually Connect by

your_computer_name” will be shown.

D. Now, PC will detect the plug-in of the USB device. The “connect” operation is a

software operation that simulates an actual USB device plug-in. That is to say,

when you do a “connect” operation in the Control Center, PC can then detect a

USB device’s plug-in, although actually you do not plug in any USB device.

E. Then, just use the USB device as if it is connected directly to your PC’s USB port.