Manualshelf

User manual

ManualsBrandsDIGITUS ManualsNetwork ComponentsNetwork print server LAN (10/100 Mbps), USB, Parallel (IEEE 1284)
51525354555657585960
55
6. Network Print Monitor
Preparation
The print server supports TCP/IP, IPX/SPX and NetBEUI protocols under Windows system.
Please make sure that the following steps have been completed before proceeding with
installation under Microsoft Windows 95/98/ME/NT4/2000/XP 32bit edition or server 2003
32bit edition.
Select A Desired Protocol
TCP/IP
The TCP/IP Protocol must be installed. For further information, please read “TCP/IP
Protocol Installation” section in this chapter.
Note: If TCP/IP protocol is chosen, please refer to “Assigning an IP Address to the print
server” section later in this chapter.
IPX/SPX
The IPX/SPX-compatible Protocol must be installed. For further information, please read
“IPX/SPX-compatible Protocol Installation” section in this chapter.
NetBEUI
The NetBEUI protocol must be installed. For further information, please read “NetBEUI
Protocol Installation” section in this chapter. The Microsoft Windows XP/2003/Vista/7/8/10
does not support the NetBEUI printing.