User manual

Page 2 of 26

Table of Contents

I. Introduction…………………………………………………………... 3

1. Features…………………………………………………………………..........3

2. Package Contents…………………………………………………………….. 3

II. Specifications…………………………………………….….………. 4

1. General……………………………………………………………..……........ 4

2. Connectors………………………………………………………….………… 5

3. LED Indicators…………………………………………………….................. 6

3.1 Host Indicators…………………………………………………................. 6

3.2 USB HUB switch with PC1/PC2 Indicators………….……..……………. 6

3.3Auto-switch /Auto Scan Indicator…………………….…………………... 6

III. 2-port USB KVM installation……………………...…………….. 7

1. System requirements……………………………………………..…............... 7

2. Hardware installation……………………………………………....………….7

3. Windows 98/98SE installation……………………………………………….. 9

4. Driver installation………………………………………………....………….. 10

4.1 OS without driver installation…………….………………..…..………… 10

4.2 Windows 98//98SE…………………….…..………………..….………… 10

5. On-Screen-Display(OSD) utility software installation for Windows……… 15

6. Using the OSD Program.………………………………………....………..… 17

6.1 Activating the OSD Program …………………………….…...………... 18

6.2 Interpreting the OSD window……………………………….……………. 19

6.3 Switching the active host with the OSD Program …………...……………20

6.4 Hiding and closing the OSD Program ………………….…………………21

IV. Operate the 2-port USB KVM……………………........................ 22

1. Manual Switch by push button……………………………………………….. 22

1.1 Host selection……………………………………………………………. 22

1.2 Activate Auto Switch Function………………………………………….. 22

2. Hot Key Switch(PS/2 Keyboard)…………………………………………….. 22

3. On-Screen-Display(OSD) Switch (Windows)……………………………… 23

4. AutoScan Function ………………………………………………………… 23

4.1 Activate Autoscan………………………………………………………… 23

4.2 Disable Autoscan………………………………………………………… 23

5. Sun Micro System Function Emulation ………………………………………24

6. Hot Key definition table……………………………………………………… 25

V. Application Notes……………………………………………………. 26