Datasheet

1. Combine 4X HDD:
DIP1~DIP4 set to the “ON” position to combine the HDD1~ HDD4 to one virtual volume. From
PC’s “Disk Manager”, it is recognized as one hard disk with the capacity is sum of HDD1,
HDD2, HDD3 and HDD4.
2. Combine 3X HDD:
1) DIP switch: DIP 1~3 ON, DIP 4 OFF
Hard disks of HDD1 ~ HDD3 are combined to one virtual volume.
HDD4 works as an independent hard disk.
From PC’s “Disk Manager”, it is recognized as two hard disks.
2) DIP switch: DIP 1 OFF, DIP 2~4 ON
Hard disks of HDD2 ~ HDD4 are combined to one virtual volume.
HDD1 works as an independent hard disk.
From PC’s “Disk Manager”, it is recognized as two hard disks.
3. Combine 2X HDD:
1) A DIP switch: DIP 1~2 ON, DIP 3~4 OFF
HDD1 and HDD2 are combined to one virtual single volume.
HDD3 and HDD4 work as independent hard disks.
From PC’s “Disk Manager”, it is recognized as three hard disks.
2) A DIP switch: DIP 1~2 OFF, DIP 3~4 ON
HDD3 and HDD4 are combined to one virtual single volume.
HDD1 and HDD2 work as independent hard disks.
From PC’s “Disk Manager”, it is recognized as three hard disks.
4 . Double combine Mode:
HDD1 and HDD2 are combined to one virtual single volume and
HDD3 and HDD4 are combined to one virtual single volume, too.
From PC’s “Disk Manager”, it is recognized as two hard disks.
5. Normal Mode:
Set DIP 1~4 to OFF position to disable the COMBINATION function. HDD1, HDD2, HDD3 and
HDD4 are acting as independent drive volumes.
From PC’s “Disk Manager”, it is recognized as four hard disks.
* The definition of DIP switch for the COMBINATION mode is listing as follows.
Please! Follow up the setting to choose the combination that you need.