USER’S MANUAL 5.25” Type USB 2.0+1394 HARD DISK /5.
Index Page Introduction…………………………………………………..……………… Features &Specification……………………………………………………. Requirements……………………..….……………………………………… Package contents…………………..……………….………………………. Hardware Installation…..….…………………………………………………. Software Installation…...…………….……………….……………………….
Introduction： This is an 5.25” 1394+USB2.0 combo hard disk /cd-rom enclosure,it will offer an easy to carry Interface solution for user to add more storage & portable device for your PC. Features & Specification： 1. USB INTERFACE: ▲ ▲ ▲ ▲ ▲ Interface standard: USB Ver:2.0 USB connectors/cable: 1 USB B type female connector and 1 USB A TO B Cable Data transfer rate: USB2.0:High Speed 480Mbps For one 3.5 inch Hard Disk only EMI : CE & FCC 2. IEEE1394A INTERFACE ▲ Data Transfer Rate :100,200,400 (Mb/S).
Packing contents： Please make sure that this package includes the following items. Item 5.
Chapter 1 Hardware Installation: Optional : For portable CD-ROM box type 1. Open the two side of case as below.
2.Please open the top case. 3.Please insert vocal transmit line on your CD ROM as below.
4.Please connect the other side to the jump as below. 5.Please connect the IDE cable to CD-ROM and advert the connection direction (Red line is pin1 near the IDE red line as below.
6.Please connect the IDE power cable to CD-ROM as below.
7.Screwing the bottom side of case. 8.Please close the top side of case as below.
9.Please assemble the two side case as below. 10.Screwing the two side as below.
.Please refer the correct case assembly as below. Optional:For 3.5’ portable HDD box enclosure type installation. 1. Open the two side of case as below.
2.Please open the top case. 3.Please screw the HDD together with plate as below.
- Page 12 -
4.Screwing the bottom side of case together with HDD. 5.Please assemble the IDE power cable with HDD. 6.Please assemble the IDE cable with HDD.
7.Please refer the view for assembly and advert the connection direction (Red line is pin1 near the IDE red line as below.) 8.Please close the top side of case as below. 9.Please insert the front panel side of case as below.
10.Please assemble the two side case as below.
11.Screwing the two side of connecters side as below.
Chapter 2 Software Installation： Supported OS Windows XP, Windows 2000, Windows ME, Windows 98SE (Windows XP and Windows ME&Win2000 works without driver) and Mac 10.x . The drivers supplied with this distribution are for Win98SE only. Windows XP and Windows ME and windows 2000 You do not need to install any driver if your computer’s O.S is Windows XP or Windows ME and Win2000 since the two O.S come with the supporting driver.
5. Please click ” Next” as below: 6.
7. Please select “Complete” and click “Next” 8. Please click “Install” for start to install driver.
9. When the drvier is install final,please click “Yes” to reatart PC. 10.
11. Windows will ask you to restart PC ,please click “yes” 12.“My computer” will appear “Removable Disk”,please format HDD when you use it at first time.
