Datasheet

USB Sharing Switch Quick Installation
1. Installation and connection figure
Note: The number of to be connected devices and PCs depends on the model you bought.
2. Installing the software
• Install the USB Sharing Application:
• Insert the Application CD in the CD-ROM drive on your computer. The installation
process starts. This is the program that is used to install the USB Sharing software.
• If the application installation does not start automatically, start Windows Explorer,
navigate to your CD-ROM and double-click the SETUP.EXE file.
• The Install page is displayed and the installation process will take a few seconds, only.
• When the End of Installation dialog boxes is displayed, click Finished.
Note: We highly recommended that you reboot your PC after the installation has been finished.
To install the software on an Apple MAC computer you need minimum Mac OS 9
(Recommended: OS X).
3. Status Indication on Taskbar:
3.1. Red (Busy status):
Another computer is using the device. The device is busy and switching between PCs is not
possible, now.
3.2. Green:
The Device is connect to the USB sharing switch now.
3.3. Yellow:
The device is connected to another computer, press Ctrl + F11 to switch to the current one you
are using now. (For MacOS, please use Alt-F11)
Note: After improper installation or connection the green light on the taskbar will light up on all
PCs the software is installed on.
USB Devices
USB sharing
PCs