User`s guide

4. Choose a video mode you think best suitable for your monitor and type its number in the

command line. For instance, typing 338 selects video mode 1600x1200x16 (see the below figure).

Incidentally, when there is a digit or letter before a three-digit number, you can also select such

video mode by typing the corresponding single digit or letter ("v" in our instance).

5. Wait until Acronis True Image OEM Quick Backup (Full version) starts and make sure that the

quality of the Welcome screen display on your monitor suits you.

To test another video mode, close Acronis True Image OEM Quick Backup and repeat the above

procedure.

After you find the optimal video mode for your hardware, you can create a new bootable rescue

media that will automatically select that video mode.

To do this, start Acronis Media Builder, select the required media components, and type the mode

number with the "0x" prefix (0x338 in our instance) in the command line at the "Bootable media

startup parameters" step, then create the media as usual.

4.3 Creating a custom rescue CD

If the recovery environment cannot detect some of the hard disk drives or the network adapter,

usually there is a problem with the drivers. Acronis rescue CD cannot contain drivers for all hardware

on the market. So when the standard rescue CD lacks some of your hardware drivers, you need to

create a custom one.

The Linux-based recovery environment used by Acronis does not provide the ability for users to add

new drivers. Because of this, you should request Acronis Customer Service Department to create a

custom rescue CD that will have all the drivers you need.

Before making a request, collect the information about your system. Select Generate System Report

in the Help menu. Acronis True Image OEM Quick Backup will automatically collect the required

information and display a list of what is collected in the report. In the process of creating the report

the program may install some components required for collecting the necessary information. When

the report is complete, click Save As and select the desired folder or leave the default My

Documents folder. The program will archive the report into a zip file. Send the file to the Acronis

Customer Service Department. They will build an iso image of a custom rescue media compatible