Inc Kato SD40-2 N Scale Mobile Decoder - Manual

Programming Ditch Lights

To program your decoder for alternating ditch lights use the following CVs:

CV51 = 106, CV52 = 107, CV63 = 64. The ditch lights are wired to the F1 and

F2 outputs for this.

Function Remapping

Function remapping allows you to program the function outputs of your

decoder to be controlled by selected function keys on your throttle. Please

consult the Digitrax Decoder Manual or website for information on function

remapping.

Digitrax Transponding CV61

Digitrax Transponding is controlled by CV61. The default value is 000 for

OFF. To turn on transponding, program CV61 to a value of 002. This allows

you to use Digitrax transponding to keep track of your rolling stock.

Decoder Reset CV08

Decoder reset lets you reset all CV values to the factory default settings. To

reset all CV values, program CV08 to a value of 008. You also have the option

of resetting all values except the 28 speed step tables. To do this, program

CV08 to a value of 009.

Warranty & Repair

Digitrax gives a one year “No Worries" Warranty against manufacturing

defects and accidental customer damage on all Digitrax products.

Visit www.digitrax.com

for complete warranty details and instructions for

returning items for repair.

Damaged decoders should be returned directly to Digitrax for repair.

Digitrax, Inc. is not responsible for unintentional

errors or omissions in this document.

2443 Transmitter RD

850-872-9890

Panama City, FL 32404

850-872-9557