Inc Kato SD40-2 N Scale Mobile Decoder - Manual

Momentum-CV03 & CV04

Acceleration is controlled by CV03 and deceleration by CV04. Both come

from the factory set to 000. A range of 000 to 031 is available for both accel

and decel. We recommend that you try CV03:003 and CV04:000 as a starting

point for experimenting with momentum.

Other LocoMotion

Features: Switching Speed, Normal Direction of

Travel & Scaleable Speed Stabilization Features

Switching speed is controlled by CV54. The factory setting is 000 for OFF. To

turn on the switching speed feature, program CV54 to a value of 001. When

this feature is on, use F6 to activate and deactivate switching speed. When

switching speed is ON and F6 is ON, the switching speed feature is on. With

the feature on the throttle’s target speed is effectively reduced by about 50%

and the effects of accel and decel programmed into the decoder are reduced by

1/4. This is useful for yard switching operations.

Normal Direction of Travel is controlled by CV29. See your decoder manual

for additional information on the settings for CV29.

The intensity, or droop, of Scaleable Speed Stabilization is controlled by

CV57. The factory setting for this feature is 006 which is suitable for most

locos. You can adjust this value in the range of 000 for OFF to 015 for the

maximum effect. Consult your Digitrax Decoder Manual for info about CVs 55

& 56 and their effects on scaleable speed stabilization.

SuperSonic

™

and Torque Compensation

The factory settings in the decoder provide quiet, smooth operation of your

locomotive under most conditions. For more information about these settings,

please see the Digitrax Decoder Manual or our web site.

2443 Transmitter RD

850-872-9890

Panama City, FL 32404

850-872-9557