Inc Kato N Scale DCC Decoder - Manual

ManualsBrandsDigitrax ManualsHobbyKato N Scale DCC Decoder

DN163K0a

Fits Kato N-P42 Genesis, PA-1, E8

and Other Locomotives

Features:

n Digitrax LocoMotion

System--<B?9<0<:<A6C2@9<<89682A52?2.9A56;4

(52646A?.E <0<!<A6<;™ 'F@A2::.82@A52:?B;9682A52?2.9A56;4A<<

Torque Compensation 3<?@:<<A5.@@698@692;A<=2?.A6<;

128 Speed Step <=2?.A6<;<?@A2=@0.;.9@</2B@21

Momentum D6A5.00292?.A6<;.;1120292?.A6<;

Normal Direction of Travel 6@B@2?@2920A./92

Switching Speed 32.AB?23<?2.@62?.;13.@A2?.002@@A<F.?1@=221@

3 Step Speed Tables @2A@A.?A:61.;1:.EC<9A.423<?0B@A<:0<;A?<9

28 Step Speed Tables D6A592C29?2@<9BA6<;3<?=?206@20<;A?<9

n Scalable Speed Stabilization (BackEMF) D6A5@6:=92@2AB=92C29

?2@<9BA6<;

n SuperSonic :<A<?1?6C23<?@692;A<=2?.A6<;

n FX

B;0A6<;@3<?=?<A<AF=60.99645A6;423320A@

Constant Brightness Lighting D6A516?20A6<;.9<?6;12=2;12;A0<;A?<9

Realistic Effects 96826A059645A@!.?@9645A@@A?</2@.;1:.;F:<?2

Dynamic and Static Qualifiers <=2?.A23B;0A6<;@/.@21<;16?20A6<;

<;<?<339<0<16?20A6<;.;1.;1D52A52?9<0<6@:<C6;4

Function Remapping <33B;0A6<;@3<?0B@A<:3B;0A6<;@2AB=

Master Light Switch AB?;@<33.999645A@3B;0A6<;@D6A5<;282F@A?<82

Advanced Consist Function Controls

n Plug ‘N Play 12@64;:.82@6;@A.99.A6<;>B608.;12.@F

n Golden-White LEDs 3<?.1121?2.96@:

n Transponder equipped ?2.1F3<?A?.;@=<;16;4<;F<B?9.F<BA

<:=.A6/92D6A51646A.9@B??<B;1@<B;1@F@A2:@

n All Mode Programming with Operations Mode Read Back-?2.1/.08*

C.9B2@?645A<;A52:.6;96;2

n Decoder Factory CV Reset D6A5<?D6A5<BA@=221A./926;6A6.96G2

n Motor Isolation Protection 529=@=?2C2;A1.:.42A<F<B?9<0<.;1120<12?

n Basic, Advanced & UniVersal Consisting

n 2 Digit and 4 Digit Addressing

n DCC Compatible

n FCC Part 15, Class B RFI compliant

H646A?.E;0 DDD1646A?.E0<: 

Complete Train Control

Run Your Trains, Not Your Track!

N Scale

Mobile Decoder

DCC Plug ‘N Play

1.5 Amp/2.0 Amp Peak

6 FX

Functions, 0.5 Amp

Summary of content (8 pages)

PAGE 1
Complete Train Control Run Your Trains, Not Your Track! DN163K0a N Scale Fits Kato N-P42 Genesis, PA-1, E8 and Other Locomotives Mobile Decoder DCC Plug ‘N Play 1.5 Amp/2.0 Amp Peak 6 FX3 Functions, 0.5 Amp Features: n n n n n n n n n n n n n n Digitrax LocoMotion® System-Your locomotives look like the real thing. The Digitrax LocoMotion™ System makes them run like the real thing, too! Torque Compensation for smooth as silk silent operation.
PAGE 2
Complete Train Control Run Your Trains, Not Your Track! Parts List 1 DN163K0a Decoder 1 Instruction sheet Installation Information See the Digitrax Decoder Manual for complete decoder test procedures, installation instructions, programming and technical information. Digitrax manuals and instructions are updated periodically. Please visit www.digitrax.com for the latest versions, technical updates and additional locomotive-specific installation instructions.
PAGE 3
2443 Transmitter Rd Panama City, FL USA 32404 www.digitrax.com T F 850-872-9890 850-872-9557 Brass pick up rails 5. Install the decoder Yellow Kapton tape between the motor clips. installed here Press down and slide the board back to lock the board under the plastic clip in the frame. Be careful to keep the brass pick up rails in position. Note: For PA-1 & e8 remove the rear LeD from Figure 3: the decoder prior to instal- Remove brass pick up rails, add yellow Kapton tape, reinlation of the board.
PAGE 4
Complete Train Control Run Your Trains, Not Your Track! Customizing Your Decoder Your Digitrax decoder is ready to run and will operate using address 03 with no additional programming. For a more prototypical railroading experience, your decoder can be customized for your specific locomotive by programming some of the Configuration Variables, or CVs, available. See the Digitrax Decoder Manual or the Digitrax web site for more information.
PAGE 5
2443 Transmitter Rd Panama City, FL USA 32404 www.digitrax.com Loco Type T F 850-872-9890 850-872-9557 V Start CV02 V Mid CV06 V Max CV05 Switcher Concentrated low speed. Limited top speed 002 038 064 Road Switcher Prototypical top speed w/evenly distributed curve from 0 to top speed 002 048 098 Mainline Loco Quick increase to cruising speed then levels off to prototypical top speed.
PAGE 6
Complete Train Control Run Your Trains, Not Your Track! wires, be very careful that the wires you add do not come into contact with any other pads or components on the board where they might create a short circuit. The DN163K0a decoder for the Kato P42 Genesis locomotive is set up with factory-installed golden-white LeDs for forward and reverse lighting. If you remove the rear LeD for installation in the PA-1 or e8, the headlight will be on in the forward direction and off in reverse.
PAGE 7
2443 Transmitter Rd Panama City, FL USA 32404 www.digitrax.com T F 850-872-9890 850-872-9557 Leave a 5/16” clearance between Figure 7: Cut light pipe into 3 parts the front of the lamp and the front Ditch Head Ditch edge of the frame for the light pipe to be re-installed. Use tweezers and Super Super be very careful not to break the glue tab glue tab lamp when bending the lamp leads. to shell to shell 4.
PAGE 8
DN163K0a Kato N-Scale P42 Genesis, PA-1, E8 & Other Locos Super EMPIRE BUILDER TM Available 0 0 0 0 Computer Interface Decoder Programmer Sound Programmer Made in U.S.A. www.digitrax.