Inc HO 6-Function DCC Decoder - Manual

Other LocoMotion

Features: Switching Speed, Normal Direction of

Travel & Scaleable Speed Stabilization (Back EMF) Features

Switching speed is controlled by CV54. The factory setting is 000 for OFF. To

turn on the switching speed feature, program CV54 to a value of 001. When

this feature is on, use F6 to activate and deactivate switching speed. With the

feature on the throttle’s target speed is effectively reduced by about 50% and

the effects of accel and decel programmed into the decoder are reduced by 1/4.

This is useful for yard switching operations.

Normal Direction of Travel is controlled by CV29. See your decoder manual

for additional information on the settings for CV29.

Scaleable Speed Stabilization intensity, or droop, is controlled by CV57. The

factory setting for this feature is 006 which is suitable for most locos. You can

adjust this value in the range of 000 for OFF to 015 for the maximum effect.

Consult your Digitrax Decoder Manual for info about CVs 55 & 56 and their

effects on scaleable speed stabilization.

SuperSonic Silent Operation and Torque Compensation

The factory settings in the decoder provide silent, smooth operation of your

locomotive under most conditions. For more information about these settings,

please see the Digitrax Decoder Manual or our web site.

Digitrax Transponding CV61

Digitrax Transponding is controlled by CV61. The initial factory set value is

000 for OFF. To turn ON transponding, program CV61 to a value of 002. This

allows you to use Digitrax transponding to keep track of your rolling stock.

When transponding is enabled, the front light of the locomotive will flicker

slightly to indicate transponding signal is being communicated. For optimal

transponding operation, we recommend that you hook up the forward and rear

lights using the standard installation instructions.

Decoder Reset CV08

Decoder reset lets you reset all CV values to the factory default settings. To

reset all CV values, program CV08 to a value of 008. You also have the option

of resetting all values except the 28 speed step tables. To do this, program

CV08 to a value of 009.

2443 Transmitter RD

850-872-9890

Panama City, FL 32404

850-872-9557