Inc HO 6-Function DCC Decoder - Manual

Digitrax LocoMotion

System

Your locomotives look like the real thing, now you can make them run like the

real thing, too. Digitrax decoders incorporate torque compensation for smooth

as silk operation. You can also program CVs that control momentum, 3 step

and 128 step speed tables, switching speed, normal direction of travel,

scaleable speed stabilization and more to take full advantage of the Digitrax

LocoMotion System.

Momentum-CV03 & CV04

Momentum is part of the LocoMotion System. Acceleration is controlled by

CV03 and deceleration by CV04. Both come from the factory set to 000. A

range of 000 to 031 is available for both accel and decel. Try CV03:003 and

CV04:000 as a starting point for experimenting with momentum.

Speed Tables-How the Loco Responds to the Throttle

With Digitrax LocoMotion, there are two types of speed tables: 3 Step Tables

and High Resolution 28 Step Tables. Please see your Decoder Manual for a dis-

cussion of the 28 Step Tables. The 3 Step Tables are set up by programming 3

CVs: Start Voltage (CV02), Mid point Voltage (CV06) and Max Voltage

(CV05). These values are set at 000 at the factory. All have a range of values

from 000 to 255. We recommend the following CV values as a starting point for

experimenting with speed tables.

Complete Train Control

Run Your Trains, Not Your Track!

Loco Type V Start V Mid V Max

CV02 CV06 CV05

Switcher

Concentrated low speed. Limited top 002 038 064

speed

Road Switcher

Prototypical top speed w/evenly 002 048 098

distributed curve from 0 to top speed

Mainline Loco

Quick increase to cruising speed then 002 128 154

levels off to prototypical top speed.