Owner`s manual

Programming Numbers - Invited, VIP and Blocked
Global Invite (Factory Default) Invites all callers who display a valid phone number
You can invite all callers who display a phone number and yet block a single number or area code. This
one command will allow all Invited callers who display a phone number to ring through to the TEL phone
port and all other devices connected directly to the phone line. To do this, enter programming with the
Program Button. Press and hold the Program Button for 3 seconds until you see “Program Mode”, then
“Pick Up Phone”, when the prompt for “Enter Code” displays enter 96 # *, display shows function. All
callers in this list are considered Invited, but not VIP callers who are in a separate list.
Inviting VIP Callers
You can program in specific VIP callers; family, friends and business associates, who can ring through at
any time by using the Program Button on the front panel. To enable this feature, press and hold the
Program Button for 3 seconds until you see “Program Mode”, then “Pick Up Phone”, when the prompt
for “Enter Code” displays enter 60 to store a number or area code of your VIP callers followed by the 10
digit number, then the * key. Example for a VIP number enter: 60, 602 555 1212 * or for a VIP area
code enter: 60, 602 *, display shows function. Store up to 30 numbers or area codes.
Inviting Area Codes
You can program in specific Invited area codes using the Program Button on the front panel. To enable
this feature, press and hold the Program Button for 3 seconds until you see “Program Mode”, then
“Pick Up Phone”, when the prompt for “Enter Code” displays enter 50 to store an area code followed by
the # key 7 times, then the * key. The # key is used as a wildcard replacement for any number.
Example for Invited area codes enter: 50, 602 ### #### *, or 50, 602 *, display shows function. Store
up to 30 area codes.
Inviting Callers within a Blocked Area Code
Invited callers within a blocked area code can only be added using programming Code 52, and not by
using the Invite button. To add an Invited number, press and hold the Program Button for 3 seconds
until you see “Program Mode”, then “Pick Up Phone”, when the prompt for “Enter Code” displays enter
52 to store a number followed by the * key. Example for an Invited caller in a blocked area code enter:
52, 602 555 1212 *, display shows stored function. Store up to 10 numbers in one or more area codes.
Blocking Individual Callers
To Block specific individual callers, press and hold the Program Button for 3 seconds until you see
“Program Mode”, then “Pick Up Phone”, when the prompt for “Enter Code” displays enter 40 to store a
number of your Blocked caller followed by the 10 digit number, then the * key. Example for a Blocked
number enter: 40, 602 555 1212 *, display shows function. Store up to 80 numbers.
Blocking Area Codes
To Block specific area codes, press and hold the Program Button for 3 seconds until you see “Program
Mode”, then “Pick Up Phone”, when the prompt for “Enter Code” displays, enter 40 to store an area code
followed by the * key. Also, the # key can be used as a wildcard replacement for any number. Ex. for a
Blocked area code and exchange enter: 40, 602 555 #### *, display shows function. Area codes are
displayed as just the area code and are included in the 80 number limit stored. Calls that start with a
Country Code, like 1 (USA) means you must enter the entire string into a blocked number. Example: to
block the entire 800 and 1-800 area codes, enter programming and enter: 40 800 *, then 40 1800 *.
You will then see area codes 800 and 1800 in the Blocked Callers List. Store up to 80 area codes.
Deleting Invited, VIP or Blocked Numbers
To delete a single number you have stored, enter programming: press and hold the Program Button
for 3 seconds until you see “Program Mode”, then “Pick Up Phone”, when the prompt for “Enter Code”
displays enter 98, enter the phone number you want to delete followed by the * key. Example for
deleting a number enter: 98, 602-555-1212 *, display shows function.
5