Owner`s manual

Viewing Caller Lists and Stored Number Removal

You can review what numbers are stored in each caller list by entering programming: press and hold the

Program Button for 3 seconds until you see “Program Mode”, then “Pick Up Phone”, when the prompt

for “Enter Code” displays enter:

41 to view Blocked Caller list – use arrow buttons to view up or down. To remove or unblock an

entry press and hold the Block Button for 3 seconds on the front panel. The number will then be

removed from that list and entered back into the Invited list if Code 96 # * (Global Invited List) is active.

51 to view Individually Invited Caller list – use arrow buttons to view up or down. To remove an

invited entry press and hold the Block Button for 3 seconds on the front panel. The number will then

be removed from that list.

53 to view Invited Caller in a Blocked Area Code list – use arrow buttons to view up or down. To

remove an invited entry press and hold the Block Button for 3 seconds on the front panel. The

number will then be removed from that list.

61 to view VIP Caller list – use arrow buttons to view up or down. To remove a VIP entry press

and hold the Block Button for 3 seconds on the front panel. The number will then be removed from

that list and entered back into the Invited list if Code 96 # * (Global Invited List) is active.

Programming Features

To enter a specific program setting, press and hold the Program Button for 3 seconds until you see

“Program Mode”, then “Pick Up Phone”. Note that if you are using a Cordless phone system you will

also have to press the Talk button. When you pick up the phone connected to the TEL phone port on

the back of the Call Blocker, the display will now show “Enter Code”. Enter any program code listed in

the manual by simply dialing that program code with the phone’s keypad to set caller lists or features.

The Call Blocker from the factory Invites every caller except No Number calls and OPX type calls which

are automatically hung up on, so you just enter those callers you want to block using either the Block

button on the front panel as the calls come in or if you already know the caller’s number, you can enter it

with programming.

Creating your own Invited Caller list

If you want to block all callers and invite only specific numbers, you will use Code 97 # * to disable the

default Global Invited List and create your own invited call list using Codes 50, 52 or 60. See

Programming Numbers - Invited, VIP and Blocked.