™ Call Blocker ™ AUTOMATICALLY BLOCKS AND ROUTES SCREENED CALLS WITH CALLER ID U.S. Patent 5,490,210 Patent Pending Owner’s Manual Version 10.2012 Copyright 1990-2012. All Rights Reserved. Digitone Call Blocker, Call Blocker and Personal Communicator are trademarks of Digitone Communications.
Digitone Call Blocker Setup ™ Thank you for choosing Digitone’s Call Blocker™ Model 10 as your Personal Communicator. Digitone Communications is confident that you will find Digitone’s unique preset features and flexibility are just the answer for your communications needs. Just connect your telephone and you’re ready to go. You don’t need to set any codes as Digitone’s Call Blocker can operate right out of the box.
How Digitone’s Call Blocker Operates Only one Digitone Call Blocker is needed for any single telephone line you want to monitor. It can be connected to any analog telephone service, wall plate or phone jack in your home or office. When calls come in, all calls displaying a valid phone number will ring through to the phones connected to the TEL phone port with Caller ID repeated. Blocked calls will not ring the phones connected to the TEL port.
Caller ID Display and Panel Buttons Automatic Caller ID Call Routing Caller ID service from your phone company is required for Digitone’s Call Blocker to work. The first call to your Call Blocker unit will initialize the Clock and Date to the current date and time. Automatic call routing will begin to work right after the first call when Caller ID information is displayed.
Viewing Caller Lists and Stored Number Removal You can review what numbers are stored in each caller list by entering programming: press and hold the Program Button for 3 seconds until you see “Program Mode”, then “Pick Up Phone”, when the prompt for “Enter Code” displays enter: 41 to view Blocked Caller list – use arrow buttons to view up or down. To remove or unblock an entry press and hold the Block Button for 3 seconds on the front panel.
Programming Numbers - Invited, VIP and Blocked Global Invite (Factory Default) Invites all callers who display a valid phone number You can invite all callers who display a phone number and yet block a single number or area code. This one command will allow all Invited callers who display a phone number to ring through to the TEL phone port and all other devices connected directly to the phone line. To do this, enter programming with the Program Button.
Programming Numbers - Invited, VIP and Blocked (con’t) Global Block Method and Code 97 # * - “I want to Block all callers and just allow certain numbers”. Note from the factory, all callers with a number displayed are already invited and can ring through, but you can create your own caller list by disabling the Global Invited List. You can then invite preferred callers using the Invite Button on the front panel or through programming.
After Hours Mode - Programmable Time Feature Introduction During a certain time of the day or night you can set the Call Blocker to enter into After Hours Mode. This mode is designed to keep phones connected to the TEL phone port from ringing and allow calls to be answered by an optional answer machine when it is enabled on a daily basis. If you run a business, then you would use this After Hours Mode so all callers can leave a message.
“Private” Call Pass Thru (Code 74) Using Code 74 can allow “Private” type calls with No Number displayed to ring through to the TEL phone port while still blocking Out of Area and stored numbered calls. To enable Private Call Pass Thru, enter programming: then enter 74, when “Enter Code” displays. To turn this feature Off, when the prompt for “Enter Code” displays enter 75, display shows function.
Troubleshooting and Setup Help “When I am in Programming I don’t see the “Enter Code” prompt even though I have picked up the phone.” The prompt for “Pick Up Phone” is for normal corded phones but if you are using a cordless phone handset, you will also have to press the Talk or SPKR button on the cordless phone handset to receive the Enter Code prompt. On 2-line phones you have to select the LINE that’s connected. “My callers cannot leave a message on my answer machine.
Power RESET When the Call Blocker appears to have been affected by power issues, simply look on the bottom of the unit in the center and find the small RESET hole. With the power still connected, gently press on the reset button once and release with a tooth pick or non metallic pointer. None of your settings, caller lists or call history will be lost. This only reboots the Call Blocker’s operating system and clears the issue. Complete Factory RESET – “I want to reset the Call Blocker to factory settings.
Limited One Year Warranty Digitone warrants to the original purchaser that its Digitone device and the component parts thereof, are free from defects in workmanship and materials for a period of one year from the date of purchase.
