Owner`s manual

6
(Ex. 1700, 5:00pm from example above), display shows function. Next, when the prompt for “Enter
Code” displays enter Code 83, then “Enter End Time” displays, enter your End time of day (Ex. 0800,
8:00am from example above), display shows function.
Monday thru Friday - Enable
To enable Monday thru Friday, when the prompt for “Enter Code” displays, enter Code 84, display shows
function. To disable Monday thru Friday, when the prompt for “Enter Code” displays enter Code 85,
display shows function.
Saturday & Sunday - Enable
If you want the same time interval to work during Saturday and Sunday, when the prompt for “Enter
Code” displays, enter Code 86, display shows function. To disable this feature, when the prompt for
“Enter Code” displays, enter Code 87, display shows function.
After Hours Mode ON or OFF – (Code 80/81)
To enable After Hours Mode, enter programming: when the prompt for “Enter Code” displays, enter
Code 81, display shows function. To turn this feature Off, when the prompt for “Enter Code” displays
enter Code 80, display shows function. Note: To enable After Hours Mode you must first enter Start
and End times (above) and enable day periods (M-S).
Anonymous, Out of Area, Private and Unknown (Code 72)
If you want to have an answer machine take these types of calls and not ring your phone you can
program in Code 72 (OPX override). Note that Code 72 allows the OPX calls through to the Line only, not
the Phone Port. To enable OPX Override, enter programming: press and hold the Program Button for 3
seconds until you see “Program Mode”, then “Pick Up Phone”, when the prompt for “Enter Code” displays
enter Code 72, display shows function. If you want to restore Blocking of OPX calls later, enter
programming: press and hold the Program Button for 3 seconds until you see “Program Mode”, then
“Pick Up Phone”, when the prompt for “Enter Code” displays, enter code 73, display shows function.
“Private” Call Pass Thru (Code 74)
Using Code 74 can allow “Private” type calls with No Number displayed to ring through to the Phone port
while still blocking Out of Area, Unknown, Unavailable, Anonymous type calls. To enable Private Call Pass
Thru, enter programming: then enter Code 74, when “Enter Code” displays. To turn this feature Off,
when the prompt for “Enter Code” displays enter Code 75, display shows function.
Dial Displayed Number (Code 90)
The DIAL button can be used to dial the number displayed of someone who has called in using the Arrow
Up and Down buttons to select a specific caller. The default operation of the Call Blocker is to dial
exactly the number shown. A second option, Code 91, is to prompt you to either add or remove the “1”
(USA Country Code) before the Call Blocker dials the number. The prompt will ask “Dial 1?” and to
answer that prompt use the Up arrow key for YES and the Down arrow key for NO. After selecting an
answer the Call Blocker will dial the number afterwhich the display will prompt you to “Pick Up the
Phone”. To enable the Dial 1 prompt enter programming: press and hold the Program Button for 3
seconds until you see “Program Mode”, then “Pick Up Phone”, when the prompt for “Enter Code” displays
enter code 91, display shows function. To return to the (default) dial displayed number only mode, enter
programming: press and hold the Program Button for 3 seconds until you see “Program Mode”, then
“Pick Up Phone”, when the prompt for “Enter Code” displays enter code 90, display shows function.
Display All Installed Codes (Code 92)
Press and hold the Program Button for 3 seconds until you see “Program Mode”, then “Pick Up Phone”,
when the prompt for “Enter Code” displays, enter code 92 to see the current settings.
Digitone’s Call Blocker works with all U.S. Domestic and Foreign FSK Caller ID systems on standard 2-
wire telephone lines, DSL Modems, VoIP Adapters, Cable Modems, Canadian and Digital to Analog phone
services from Skype™, Vonage™, Cell Phone Gateways, and Magic Jack™*.
* All trademarks, trade names, service marks and logos of respective manufacturers referenced herein
are registered trademarks of their respective companies.