Owner`s manual

Programming Numbers - Invited, VIP and Blocked
Global Invite (Factory Default) Invites all callers who display a phone number
You can invite all callers who display a phone number and yet block a single number or area code. This
one command will allow all Invited callers who display a phone number to ring through to the PHONE
port and all other devices connected directly to the phone line. To do this, enter programming with the
Program Button. Press and hold the Program Button for 3 seconds until you see “Program Mode”, then
“Pick Up Phone”, when the prompt for “Enter Code” displays enter code 96 # *, display shows function.
All callers in this list are considered Invited, but not VIP callers who are in a separate list.
Inviting Individual Callers - “I want to Block all callers and just allow one or more numbers”
Note from the factory, all callers with a number displayed are already invited and can ring
through, but you can create your own caller list by disabling the Global Invited list first. You can then
program in preferred Invited callers using the Program Button on the front panel. To enable this feature
and to clear the caller lists, press and hold the Program Button for 3 seconds until you see “Program
Mode”, then “Pick Up Phone”, when the prompt for “Enter Code” displays enter Code 97 #*, display
shows function. Then when the prompt for “Enter Code” displays again, enter Code 50 to store a 10
digit number, then the * key. Example for individual numbers enter: Code 50, 602 555 1212 *, display
shows function. Store up to 30 numbers including area codes.
Inviting VIP Callers - “I want to invite my family & friends to ring through at any time.”
You can program in specific VIP callers who can ring through at any time by using the Program Button on
the front panel. To enable this feature, press and hold the Program Button for 3 seconds until you see
“Program Mode”, then “Pick Up Phone”, when the prompt for “Enter Code” displays enter Code 60 to
store a number of your VIP callers followed by the 10 digit number, then the * key. Example for a VIP
number enter: Code 60, 602 555 1212 *, display shows function. Store up to 30 numbers.
Inviting Area Codes
You can program in specific Invited area codes using the Program Button on the front panel. To enable
this feature, press and hold the Program Button for 3 seconds until you see “Program Mode”, then
“Pick Up Phone”, when the prompt for “Enter Code” displays enter Code 50 to store an area code
followed by the # key 7 times, then the * key. The # key is used as a wildcard replacement for any
number. Example for Invited area codes enter: Code 50, 602 ### #### *, display shows function.
Blocking Individual Callers
To Block specific individual callers, press and hold the Program Button for 3 seconds until you see
“Program Mode”, then “Pick Up Phone”, when the prompt for “Enter Code” displays enter Code 40 to
store a number of your Blocked caller followed by the 10 digit number, then the * key. Example for a
Blocked number enter: Code 40, 602 555 1212 *, display shows function. Store up to 80 numbers.
Blocking Area Codes
To Block specific area codes, press and hold the Program Button for 3 seconds until you see “Program
Mode”, then “Pick Up Phone”, when the prompt for “Enter Code” displays enter Code 40 to store an area
code followed by the # key 7 times, then the * key. The # key is used as a wildcard replacement for
any number. Example for Blocked area code enter: Code 40, 602 ### #### *, display shows function.
Area codes are displayed as just the area code and included in the 80 number limit stored.
Deleting Invited, VIP or Blocked Numbers
To delete a single number you have stored, enter programming: press and hold the Program Button
for 3 seconds until you see “Program Mode”, then “Pick Up Phone”, when the prompt for “Enter Code”
displays enter Code 98, enter the phone number you want to delete followed by the * key. Example for
deleting a number enter: Code 98, 602-555-1212 *, display shows function.
Caller List Deletion
WARNING: This will delete all numbers from all lists! To delete ALL numbers stored, enter
programming: press and hold the Program Button for 3 seconds until you see “Program Mode”, then
“Pick Up Phone”, when the prompt for “Enter Code” displays, enter Code 98 # *, display shows: “ALL
NBR DELETED”. All numbers stored from all lists will be cleared.
4