Owner`s manual

Programming Features
To enter a specific program setting, press and hold the Program Button for 3 seconds until you see
“Program Mode”, then “Pick Up Phone”. When you pick up the phone connected to the Phone port on
the back of the Call Blocker, the display will show “Enter Code”. Enter any of program codes listed in the
manual by simply dialing that program code with the phone’s key pad to set caller lists or features.
The Call Blocker from the factory
Invites every caller except No
Number calls and OPX type calls
which are automatically hung up
on, so you can just enter those
callers you want to block using
either the Block button on the front
panel as the calls come in or if you
already know the caller’s number,
you can enter it with programming.
If you want to remove the default
Global Invited List, you can use the
Caller List Deletion command
detailed in Programming Numbers
and start with your own call list.
Viewing Caller Lists
When Call History starts to fill up
with calls, you can jump to the Top of List or the End of List by pressing and holding the Up arrow key
to go to the Top of List or pressing and holding the Down arrow key to go to the End of List.
You can review what numbers are stored in each caller list by entering programming: press and hold the
Program Button for 3 seconds until you see “Program Mode”, then “Pick Up Phone”, when the prompt
for “Enter Code” displays enter code:
Code 41 to view Blocked Caller list – use arrow buttons to view up or down. To remove an entry
press and hold the Block Button for 3 seconds on the front panel. The number will then be removed
from that list and entered back into the Invited list if code 96 # * (Global Invited List) is active.
Code 51 to view Individually Invited Caller list – use arrow buttons to view up or down. To remove
an entry press and hold the Block Button for 3 seconds on the front panel. The number will then be
removed from that list.
Code 61 to view VIP Caller list – use arrow buttons to view up or down. To remove an entry press
and hold the Block Button for 3 seconds on the front panel. The number will then be removed from
that list and entered back into the Invited list if code 96 # * (Global Invited List) is active.
First Ring Suppression – Caller ID Pass Thru Mode (Code 70)
When a call comes in, the phone company’s Caller ID information will display on all phones connected
to the telephone line but the Call Blocker will suppress the first ring to the Phone Port to
prevent it from ringing and receiving Caller ID. If the caller is an Invited caller then the Caller ID
information will display on the first ring to the phones connected to the Phone port thereafter. This stops
unwanted Caller ID information from being received by the phones connected to the Phone port, like Out
of Area, Unavailable, a Blocked caller’s number. If you don’t want to suppress the first ring to the Phone
port and hear the first ring, enter programming: press and hold the Program Button for 3 seconds until
you see “Program Mode”, then “Pick Up Phone”, when the prompt for “Enter Code” displays enter code
71, display shows function. This code will allow all rings and all Caller ID information to be received by
phones connected to the Phone port. To return to the (default) first ring suppression mode, enter
programming: when the prompt for “Enter Code” displays enter code 70, display shows function.
3