™ Call Blocker ™ AUTOMATICALLY BLOCKS AND ROUTES SCREENED CALLS WITH CALLER ID U.S. Patent 5,490,210, Patent Pending Owner’s Manual Version 10.0 Copyright 1990-2010. All Rights Reserved. Digitone Call Blocker, Call Blocker and Personal Communicator are trademarks of Digitone Communications.
Digitone Call Blocker™ Setup Thank you for choosing Digitone’s Call Blocker™ Model 10 as your Personal Communicator. Digitone Communications is confident that you will find Digitone’s unique preset features and flexibility are just the answer for your communications needs. Just connect your telephone and you’re ready to go. You don’t need to set any codes as Digitone’s Call Blocker can operate right out of the box.
How Digitone’s Call Blocker Operates When calls come in, all phone numbers that are Invited will ring phones throughout your home/office like normal and to the PHONE Port on the back of the Call Blocker, except for Anonymous, Out Of Area, Private and Unknown callers showing no phone number. These calls will be answered by the Call Blocker for processing and by default be hung-up on unless program Code 72 is enabled to allow these call types to ring in.
Programming Features To enter a specific program setting, press and hold the Program Button for 3 seconds until you see “Program Mode”, then “Pick Up Phone”. When you pick up the phone connected to the Phone port on the back of the Call Blocker, the display will show “Enter Code”. Enter any of program codes listed in the manual by simply dialing that program code with the phone’s key pad to set caller lists or features.
Programming Numbers - Invited, VIP and Blocked Global Invite (Factory Default) Invites all callers who display a phone number You can invite all callers who display a phone number and yet block a single number or area code. This one command will allow all Invited callers who display a phone number to ring through to the PHONE port and all other devices connected directly to the phone line. To do this, enter programming with the Program Button.
Operating Modes You can switch between the operating modes using the programming button and by entering one of the mode numbers. The Call Blocker can toggle between the modes Standard, Business or Standby using one of the settings. Note: After Hours Mode runs together with only Standard or Business Mode when either mode is enabled. Mode settings are displayed each time the phone is placed On-Hook (hung-up).
(Ex. 1700, 5:00pm from example above), display shows function. Next, when the prompt for “Enter Code” displays enter Code 83, then “Enter End Time” displays, enter your End time of day (Ex. 0800, 8:00am from example above), display shows function. Monday thru Friday - Enable To enable Monday thru Friday, when the prompt for “Enter Code” displays, enter Code 84, display shows function. To disable Monday thru Friday, when the prompt for “Enter Code” displays enter Code 85, display shows function.
Limited One Year Warranty Digitone warrants to the original purchaser that its Digitone device and the component parts thereof, are free from defects in workmanship and materials for a period of one year from the date of purchase.
