Owner`s manual

Storing Invited and Blocked Numbers
Adding Phone Numbers – Area Codes
You can block or allow whole area codes, exchanges or parts of numbers using the (#) symbol as a
replacement for any number. To invite a single area code, for example, enter 96 then 602 (for example)
then ### ####. This will allow all callers from 602 area code to ring your phone and block all others.
Conversely, if you want to block that area code, use code 97 then 602 ### ####. Remember you
must create the Invited callers list First before you build the Blocked callers list!
Global Invite
“I want to INVITE all callers and block just one or more numbers”
You can invite all callers who display a phone number and yet block a single number or area code. To do
this, enter programming with ## and then 96 <Beep> then ### ### #### <Beep> <Beep>. Be
sure to listen for the confirmation tones. This one command will allow ALL Invited callers who display a
phone number to ring through. However, all Unknown callers will be greeted by the Outgoing Message.
If you want to allow even the Unknown callers through, you will need to use the All Calls Invited method
below where all calls except Blocked callers are forwarded to your phones. Note: If you have
previously entered a specific Invited number, programming will beep only once to let you
know it has already been entered.
All Calls Invited Method (Including Unknown Callers)
To allow all calls through except Blocked callers, enter programming with ## then the following
numbers: 67 <Beep> # * * <Beep><Beep>, 781 <Beep><Beep>, 791 <Beep><Beep>, 54
<Beep><Beep>, 500 <Beep><Beep>, 96 <Beep> ### ### #### <Beep><Beep> and to remove
the OGM, 11 <Beep><Beep><Beep> wait 1 second then * <Beep><Beep>. This method only works
for locally answered calls within 3 rings to your Phone/Answer machine where the calls are answered.
Invited Callers Indicator Blocked Callers Indicator
Inviting Individual Callers
“
I want to BLOCK all callers and just allow one or more numbers
”
The PrivacyCall comes from the factory answering every call with the main greeting until you invite callers
either one at a time through the Yellow button function or by pre-programming them in using the invite
command 96. To enter single Invited phone numbers to storage, Press ##, then 96, followed by the ten
digit phone number, (for example 602 555 1212) hear <Beep><Beep>. Note: If you have already
entered this number, programming will beep only once.
Blocking Individual Callers
To enter single Blocked numbers Press ##, then 97, followed by the ten digit phone number, hear
<Beep><Beep>. Do Not Use code 97 with ### ### #### because it will prevent all calls from
getting through. Note: If you have previously entered a specific Blocked number,
programming will beep only once to let you know it has already been entered.
Deleting Invited and Blocked Numbers
Caller List Deletion
To delete a number you have stored, Press ##, then 98, followed by the ten digit phone number, hear
<Beep><Beep>. To delete all numbers stored, enter ## 98 then ### ### #### hear
<Beep><Beep>. WARNING: This will delete all numbers from both lists!
4