Owner`s manual

Caller ID Display

YELLOW BUTTON

PRESS ONCE TO INVITE

PRESS TWICE TO BLOCK

Note: When Pressing the Yellow

Button twice, the Caller’s ID will

be erased from the Screen.

Standard Caller ID Display

Caller identification Caller ID Name and Number Service from your telephone company is required for the

display to work. The unit has a clock and calendar built-in to the display along with the name and

number of the caller. The first call to your PrivacyCall unit will initialize the clock and calendar to the

current date and time. The display on the front of the PrivacyCall unit will show the number of calls, new

calls, date and time of each call.

Yellow Button Entry

After an incoming call is displayed, you can automatically store the LAST number displayed on the LCD

on the PrivacyCall front panel by pushing the Yellow button once briefly for an Invited caller, when you

are either on the line with that caller or just after you hang-up. The Left Green LED will flash five times to

indicate it has stored the number and a <Beep><Beep> can be heard in the handset. Note: If you have

already entered this number, the LED will flash only once. THIS ONLY WORKS WITH THE LAST

NUMBER DISPLAYED AT THE END OF THE LIST!

To block the currently displayed number, press the left Yellow button on the PrivacyCall front panel

twice and it will be entered into the Blocked Number list. The Right Green LED will flash five times to

indicate it has stored the number and a <Beep><Beep> can be heard in the handset. Note: If you have

received corrupted or non-distinguishable CID data, you will see the Yellow LED on the right, light five

times to indicate the number was not stored and there was an error.

Viewing Call History The middle button is the Up View button that displays the previous calls or Top

of List. The right button is the Down View button that displays the last call or End of List.

Caller ID Pass-Thru Mode

If you want Caller ID info to show on all phones, PRESS ## then enter 751 hear <Beep><Beep>. To

disable this feature, enter 750. Note: All phones will ring once on all phones before Caller ID is displayed.