Owner`s manual

Caller ID Display

YELLOW BUTTON

PRESS ONCE TO INVITE

PRESS TWICE TO BLOCK

Note: When Pressing the Yellow

Button twice, the Caller’s ID will

be erased from the Screen.

Clearing Display

Press and Hold Yellow Button for 3

seconds to clear all displayed calls.

Standard Caller ID Display

Caller ID Name and Number Service from your telephone company is required for the display to work.

The first call to your PrivacyCall unit will initialize the clock and calendar to the current date and time.

Viewing Call History The middle button is the Up View button that displays the previous calls or Top

of List. The right button is the Down View button that displays the last call or End of List.

Yellow Button Entry

THIS FUNCTION ONLY WORKS WITH THE LAST NUMBER DISPLAYED AT END OF LCD LIST!

After an incoming call is displayed, you can automatically store the LAST number shown on the LCD on

the PrivacyCall front panel by pushing the Yellow button Once briefly for an Invited caller, when you

are either on the line with that caller or just after you hang-up. The Left Green LED will flash five times to

indicate it has stored the number and a <Beep><Beep> can be heard in the handset.

Note: If you accidentally press the button Twice and Block the caller, you can reverse the entry and

Invite the call by simply pressing the Yellow button Once or, vice versa if to you Invited the call instead

of Blocked it. If you have already stored this number, the LED will flash only once.

To Block the currently displayed number, press the Yellow button twice on the PrivacyCall front panel

and it will be entered into the Blocked Number list. The Right Green LED will flash five times to indicate it

has stored the number and a <Beep><Beep> can be heard in the handset.

Last Call Remote Entry

You can enter the LAST caller into the Caller Lists by entering programming with # #, then Code * 2 #

to Block or Code * 1 # to Invite them after you have finished the call. This is useful when you have

installed the PrivacyCall in a basement, phone closet and are using phones away from the unit.

Inbound Call Indicator and Caller ID

All PrivacyCall models show the line status with the front two Green lights (LEDs). When these two

lights flicker quickly, it means there is an inbound call coming in from the phone company. These two

lights will also come on when an identified caller on the Invited Caller List is calling in. They will stay on

until the end of the ring count or if the line is answered. The Green LEDs also flash once quickly when

there is a hang-up or a detected phone being taken offhook.