Owner`s manual

PrivacyCall Setup
Thank you for choosing PrivacyCall
™
as your Personal Communicator. Digitone Communications is
confident that you will find PrivacyCall’s unique preset features and flexibility are just the answer for your
communications needs. Just connect your telephone devices and you’re ready to go. You do not need to
record a message or set any codes as PrivacyCall can operate right out of the box.
1. Connect the supplied line cord to your
telephone wall jack and then to the Telco
Port on the PrivacyCall.
2. Plug the small end of the Power Adapter
into the port labeled "12VAC" on the
PrivacyCall, next plug in the Power Adapter
to a standard 120VAC wall receptacle.
3. Optionally, you can connect another
Caller ID unit to the EXT/CID Port.
4. Connect your answer machine to the
Answer Port and set the answer delay to
three or four rings.
5. Connect your combo Phone-Answer
Machine system to the Phone Port of the
PrivacyCall. Additional phones can be
connected to Port 3.
6. Connect your Fax Machine to Port 4.
1