PrivacyCall Blocker ™ AUTOMATICALLY ROUTES FAXES AND SCREENED CALLS WITH CALLER ID AND PRIVACY CODES! U.S. Patent 5,490,210, Patent Pending Owner’s Manual Version 9.0.3.0 Copyright 1990-2010. All Rights Reserved. PrivacyCall Blocker, PrivacyCall and Digitone Personal Communicator are trademarks of Digitone Communications.
PrivacyCall Setup Thank you for choosing PrivacyCall™ as your Personal Communicator. Digitone Communications is confident that you will find PrivacyCall’s unique preset features and flexibility are just the answer for your communications needs. Just connect your telephone devices and you’re ready to go. You do not need to record a message or set any codes as PrivacyCall can operate right out of the box. 1.
OutGoing Message – Main Greeting (Note: No Battery Backup is Needed) Follow the setup on page 1 to assist you in recording your OGM. The purpose of the statement “we do not accept telemarketing calls and please put us on your do not call list” is to inform your uninvited caller that he should not attempt to call you again and is legally binding. Review the following example: (Pre- recorded) ”Hello, if you know your party’s extension, enter it at any time.
Caller ID Display YELLOW BUTTON PRESS ONCE TO INVITE PRESS TWICE TO BLOCK Note: When Pressing the Yellow Button twice, the Caller’s ID will be erased from the Screen. Clearing Display Press and Hold Yellow Button for 3 seconds to clear all displayed calls. Standard Caller ID Display Caller ID Name and Number Service from your telephone company is required for the display to work. The first call to your PrivacyCall unit will initialize the clock and calendar to the current date and time.
Storing Invited and Blocked Numbers PrivacyCall works with all U.S. Domestic and Foreign FSK Caller ID systems on Standard 2-Wire Telephone Lines, Digital Subscriber Lines (DSL), ADSL Modems, VoIP Adapters (Linksys, Motorola), Cable Modems, Canadian and Digital phone services from Skype, Vonage, Cox Cable and others. PrivacyCall models come from the factory Inviting every caller except Unknown and no number which are automatically answered, so you can just enter those callers you want to block.
Call Types & Caller ID Reception First Ring Suppression Mode (Code 750) When a call comes in, the phone company’s Caller ID information will display on all phones connected to the telephone line but the PrivacyCall will suppress the first ring to the Phone Port to prevent it from ringing and receiving Caller ID. If the caller is an Invited caller then the Caller ID information will display on the first ring to the phones connected to the Phone port thereafter.
Advanced User Features Internal Audible Ringer (Code 941) PrivacyCall models come with an internal audible ringer just like a phone has so you can hear your caller ringing in. The ringer only sounds when an invited or coded caller dials in or during programming. So when your caller who is on the Invited list calls, the ringer will sound off and Port 2 will begin to ring any phones connected to it.
Auto Fax Detection (Code 501) PrivacyCall can automatically detect incoming fax calls processed during the Main Greeting and route them to Port 4 after OGM 1 is announced. This feature can be disabled with code 500 and re-enabled with code 501 through programming. Using your phone in any port, PRESS ## then PRESS 500 hear to disable. To re-enable auto fax detection, enter 501 hear .
Time Of Day Mode (TOD) - Programmable Time Feature Introduction During a certain time of the day or night you can set the PrivacyCall to enter into TOD Mode. This mode is designed to make all calls go to the answer machine when it is enabled, either on a one time or daily basis. If you run a business, then you would use this After Hours Mode so all callers can leave a message.
Business Mode (Code 931) Business Mode allows All calls including Out of Area, Private, Unknown, etc. to ring through except Blocked callers. This mode works with your phone company’s voice mail and allows all calls to ring through, but blocks those phone numbers you have entered into the Blocked Callers List. To enable Business Mode, enter programming with [#] [#] , then enter Code 931 . To disable Business Mode enter programming with [#] [#] , then enter Code 930 .
Privacy Code Access Security (Code 350) Privacy code access security is designed to block any dialing in attempts for security purposes if you are ONLY using the PrivacyCall for Caller ID auto routing. This prevents those unknown callers from gaining access to your phones by repeatedly dialing in and finding your private extension number. To enable Privacy Code Access Security, use your phone in any port and PRESS ## then PRESS 350 hear . To disable this feature, PRESS 351 hear .
Limited One Year Warranty Digitone warrants to the original purchaser that its Digitone device and the component parts thereof, are free from defects in workmanship and materials for a period of one year from the date of purchase.
